Preparation - Beko LSG4545W User Manual

Table of Contents

Advertisement

4

Preparation

• For a freestanding appliance;
'this refrigerating appliance is not
intended to be used as a built-in
appliance.
• Your appliance should be installed at
least 30 cm away from heat sources
such as hobs, ovens, central heater
and stoves and at least 5 cm away
from electrical ovens and should not
be located under direct sunlight.
• The ambient temperature of
the room where you install your
appliance should at least be
10°C. Operating your appliance
under cooler conditions is not
recommended with regard to its
efficiency.
• Please make sure that the interior of
your appliance is cleaned thoroughly.
• If two appliances are to be installed
side by side, there should be at least
2 cm distance between them.
• When you operate your appliance
for the first time, please observe the
following instructions during the
initial six hours.
• The door should not be opened
frequently.
• It must be operated empty without
any food in it.
• Do not unplug your appliance. If a
power failure occurs out of your
control, please see the warnings in
the "Recommended solutions for
the problems" section.
• Original packaging and foam
materials should be kept for future
transportations or moving.
• Due to temperature change as
a result of opening/closing the
product door during operation,
condensation on the door/body
shelves and the glass containers is
normal especially in Summer.
• Since hot and humid air will not
directly penetrate into your product
when the doors are not opened,
your product will optimize itself in
conditions sufficient to protect your
food. Functions and components
such as compressor, fan, heater,
defrost, lighting, display and so on
will operate according to the needs
to consume minimum energy under
these circumstances.
12
EN

Advertisement

Table of Contents
loading

Table of Contents