Advertisement
Available languages
Available languages
EN VI R ON M EN TAL P R OTE C TI ON IN F O RM A TIO N
This symbol indicates that once the appliance is no longer needed, it cannot
be disposed together with other miscellaneous municipal waste. It should be
collected and eliminated separately, i.e. in containers specially marked with
this symbol in large-dimension rubbish collection areas. Full information on
where to submit the old appliance safety can be obtained from local
government authorities, the shop where you bought the appliance or the
manufacturer's representatives.
• The appliance can't be disposed of by burning!
If you decided to scrap the appliance, make it impossible to use in order to prevent
possible misadventure. Pull out the electric plug from the electricity supply socket and
then cut off the cord. Tear off the gasket. Break the door lock if any.
W A R N I N G ! Do not dismantle the appliance yourself. Pass it on to recycling
companies.
The appliance is a upright freezer. The freezer is intended for freezing and
long-term storage of foodstuffs.
THE APPLIANCE IS ECOLOGICALLY CLEAN, CONTAINING NO MATERIALS
HARMFUL TO THE OZONE LAYER: the refrigerant used is R600a, the foaming
agent used for the appliance insulation is cyclopentane C
THE MANUFACTURER GUARANTEES RELIABLE OPERATION OF THE FREEZER
WHEN THE RELATIVE AIR HUMIDITY NOT GREATER THAN 70 PER CENT AND
THE AMBIENT TEMPERATURE IS:
+16 TO +32 DEGREES CELSIUS (Climate class N);
+16 TO +38 DEGREES CELSIUS (Climate class ST);
+16 TO +43 DEGREES CELSIUS (Climate class T).
All device-specific data of the energy label have been determined by the manufacturer
under laboratory conditions in accordance with pan-European standardized measuring
methods. These are regulated by ISO EN 15502. The actual energy consumption
depends on the usage and might therefore also be above the values determined by the
manufacturer under standard conditions. An expert knows these relations and will
execute the tests with special measurement instruments in accordance with the
regulations in place.
MANUFACTURER DATA
The manufacturer reserves the right ti make future changes to technical parameters
and specifications. Product is subject to changes and improvements.
GE NE RAL IN F OR M AT IO N
4
H
.
5
10
Advertisement
