Ferris Pathfinder Series Operator's Manual page 14

Gate Stop
The gate stop controls the minimum to maximum opening
of the hopper. The gate stop is located on the front of the
hopper. Rotate the knob clockwise or counterclockwise until
desired gate opening is achieved.
Gate Lever
The gate lever controls the valve that opens at the bottom
of the hopper. To open the hopper valve (to allow granular
flow), pull on the gate lever. To close the hopper valve (to
stop granular flow), push the gate lever.
Spray Control Lever
The spray control lever controls the flow of liquid from the
tank to the spray nozzles. To open the valve, move the lever
to the horizontal position. To close the valve, move the lever
to the vertical position. See Instructional Decal 5105769.
Spray Control Knob
The spray control knob controls the spray width pattern. To
spray with the broadcast nozzle, turn the knob to the "WIDE"
position. The "WIDE" position provides a maximum spray
width of eleven feet (11'). To spray with the the trim nozzle,
turn the knob to the "NARROW" position. The "NARROW"
position provides a maximum spray width of three feet
(3'). See Instructional Decal 5106521.
14 ferrismowers.com