Advertisement
once vehicle is supported, ensure that the vehicle and stands are stable before starting work. ensure that it is not possible for the vehicle
9
to move before commencing any work.
inspect stands before each use. Do not use if they show signs of damage. Do not use if it is suspected that they have been
9
overloaded.
Before commencing any work or going beneath the vehicle, undertake a risk assessment. ensure that a responsible person is aware of
9
the work about to be undertaken.
Replace any labels on the axle stand should they become unreadable. This applies in particular to any warning or operation instruction
9
labels. if replacement labels are required, contact your Sealey stockist.
Do not use axle stands on the highway, or anywhere else if it is deemed to be unsafe.
8
Do not push or twist the vehicle/load whilst it is supported on stands.
8
Do not mix components between stands. Use only as supplied.
8
Do not allow children or animals in the vicinity of a vehicle supported on axle stands.
8
Do not leave a vehicle on axle stands in an area that could be considered a hazard to others or property.
8
folloW StepS 1, 2, anD 3 to coRRectly place Vehicle / loaD onto aXle StanDS.
9
i
2.
intRoDuction
Comprises essential equipment required to safely jack up a vehicle. includes a 2tonne trolley jack, a pair of folding wheel chocks, a pair of axle
stands (2tonne combined), 6 wheel padded creeper for comfort whilst carrying out maintenance and an extending l-bar wrench with 17mm & 19mm
socket.
i
3.
Specification
Model no: ............................................................ Jkit01_V2
Jack:
Capacity: .................................................... 2 tonne(2,000 kg)
minimum saddle height: ............................................. 135mm
maximum saddle height: ............................................ 340mm
maximum chassis height: ........................................... 135mm
length: ....................................................................... 447mm
Weight: .......................................................................... 8.7kg
axle stands:
Capacity each: .......................................... 1 tonne (1,000 kg)
Capacity pair: .......................................... 2 tonnes (2,000 kg)
minimum height: ......................................................... 287mm
maximum height: ........................................................ 391mm
creeper:
Frame:............................................................................ steel
Size l x W x d: ........................................901 x 425 x 120mm
Wheels: ................................................................................ 6
© Jack Sealey limited
Original Language Version
JKiT01.V2
issue 2 (3, 6)
17/09/19
Advertisement
