Page 1
Series User’s Guide Version: 0.1 Date: Jul.2023...
Page 2
The information is provided “as is”, and Flyingvoice does not provide any warranty and is subject to change without notice. All risks other than risks caused by use of the information are borne by the recipient. In no...
Page 3
(3) you represent and warrant that you have the right, authority and capacity to enter into this agreement and to abide by all its terms and conditions, just as if you had signed it. The EULA for this product is available on the Flyingvoice Support page for the product.
Page 4
GNU GPL INFORMATION Flyingvoice phone firmware contains third-party software under the GNU General Public License (GPL). Flyingvoice uses software under the specific terms of the GPL. Please refer to the GPL for the exact terms and conditions of the license.
Page 5
WEB management page. Number Server Domain Name Description Factory Setting https://prv3.flyingvoice.net:442 Flyingvoice Provision web management Enable configuration server prv3.flyingvoice.net:3450 Flyingvoice Provision web management stun Enable server https://prv4.flyingvoice.net Flyingvoice Provision web management Enable backup server log3.flyingvoice.net:9005 Flyingvoice Provision web management log Disable server http://acs3.flyingvoice.net:808...
Chapter 1 Forewords Chapter 1 Forewords Flyingvoice i86 is a SIP audio intercom terminal. It has a exquisite appearance, clear and high-definition voice, and provides users with high-quality communication intercom services. And its dust-proof and water-proof level meets the IP65 standard, which is applicable to indoor and outdoor to use.
For further information and support, please contact your system administrator. 2.1 Appearance Introductions The main hardware components of the i86 (including i86-01 and i86-03) are as follows: Figure 2-1 (Front) Figure 2-2 (Remove the cover) Flyingvoice Network Technology Co., Ltd.
Page 9
SSID: Wireless WiFi Name Fuselage Sticker SN: Product ID MAC:MAC Address Functions: Reset Key 1. Restore factory settings (The cover needs to be removed) 2. Turn on WiFi Screw Hole type-86 Box Screw Hole Position Flyingvoice Network Technology Co., Ltd.
Serial Number Name Quantity i86-01/ i86-02/i86-03 Connector Small Screwdriver Screws Quick Installation Guide 2.4 Documents The user’s documents available for the i86 series are: Name Content Position Language Chinese or Package English Quick Installation Installation steps and basic configuration of...
( 1 ) For passive device (without power supply device), refer to Figure 3-1 and connect the switch. (2)For active device (with its own power supply device), refer to Figure 3-2 and connect the switch. Flyingvoice Network Technology Co., Ltd.
Finally, install the cover to complete the panel installation. Figure 3-3 (Installation demonstration) 3.1.3 Device Boot After the device is connected and powered on, it should wait for the device to start normally. The device starts successfully when the welcome tone is heard. Flyingvoice Network Technology Co., Ltd.
Click Login. Figure 3-4 (Web login interface) Method 2: WiFi Configuration of i86 You can briefly press the Reset button of the i86, and the i86 will broadcast a prompt Flyingvoice Network Technology Co., Ltd.
SIP server and interface number respectively. You can consult your administrator to obtain the registration information. 3. After the configuration is completed, click Save & Apply below to view the registration status. Figure 3-5 (Wire configuration interface) Flyingvoice Network Technology Co., Ltd.
3. Select "SpeedDial" in the corresponding key type, and fill in the opposite extension number in the value 4. You can also fill in the extension number remarks in the label 5. Click Save to make one click call through i86 Figure 4-1 Flyingvoice Network Technology Co., Ltd.
The automatic answering function can be enabled for the device. When the device has an incoming call, it will automatically answer the call. You can find all the auto answer numbers in "Phone - Preferences" and turn them on. Figure 4-2 Flyingvoice Network Technology Co., Ltd.
The following is an explanation of each function: Speed Dialing It call the corresponding extension number Multicast It can broadcast and talk to multiple devices Action URL It can trigger access to the entered url address Flyingvoice Network Technology Co., Ltd.
Page 19
Indoor version (i86-03) Mapping device the left dialing/answering key Left Key Mapping device the right dialing/answering key/opening door/others Right Key Virtual Key As the spare key set for the input interface, there is no entity mapping Flyingvoice Network Technology Co., Ltd.
Value is Monitoring Address (Example 224.0.0.1:10001) Figure 5-1 2. The broadcast device can listen to the multicast address and interface through Web settings 3. Select Phone ->Enter Multicast IP ->Enter Monitoring Address (Example 224.0.0.1:10001) Flyingvoice Network Technology Co., Ltd.
The device monitoring the address can receive the multicast content without answering 5.2 Input Port Setting You can meet your personalized scene needs through input devices such as access switches, infrared probes, and vibration sensors. Path: Phone-Security-Settings Figure 5-3 Flyingvoice Network Technology Co., Ltd.
Support filling in third-party platform URL for signal reporting 5.3 Output Port Setting You can access input devices such as electric locks and alarms to achieve scene requirements such as opening doors and alarming through the i86. Figure 5-4 Flyingvoice Network Technology Co., Ltd.
Page 23
ConfigManApp.com?key=Trigger Command /Reset Command The default is admin/admin User If you have modified your user name and password, please fill in your Name/Password modified user name and password IP Address Enter the IP address you need to control Flyingvoice Network Technology Co., Ltd.
1. Presses the speed dial keyof i86 to call the indoor phone 2. Press the trigger code "1234" on the phone, and the intercom will play DTMF tone at the same time 3. Intercom enable output port to realize door opening and other operations Flyingvoice Network Technology Co., Ltd.
Run the FDC software, in the upper left corner ->Device ->Scan, wait for the scanning to complete, and then you can see the devices connected under the current network Figure 6-1 Scanning b. Select in the upper left corner ->Select All: i86 Flyingvoice Network Technology Co., Ltd.
Page 26
Select Device ->Firmware Device - Upgrade Firmware in the upper left corner Figure 6-3 Select device d. Select the version upgrade file in the window Figure 6-4 Select file e. Wait for the firmware upgrade to be completed Flyingvoice Network Technology Co., Ltd.
Chapter 6 Bulk Deployment 6.1.2 Export Profile Device ->Export information ->Save format. csv ->Select the save path ->After export, it can be opened in Excel Flyingvoice Network Technology Co., Ltd.
1. Open the device web page ->Administration ->Go down to find the factory settings Figure 7-1 Restore factory settings 2. Click Factory Defalut ->OK -Wait for recovery to be completed Flyingvoice Network Technology Co., Ltd.
The i86 device can be upgraded in the web page. 1. Go to the website-> Administration-> Firmware Upgrade Select the file and click Upgrade. You can choose to Ban/Enable Delete the current configuration. 2. Click and Save Figure 7-2 Flyingvoice Network Technology Co., Ltd.