Page 1
V20220069 MYJG-50W Laser Power Supply Instruction Manual...
Page 2
With its high efficiency, frequency, and speed, this power supply is an essential part of your laser engraver, converting standard power into the high-voltage power needed for your laser tube. The lightweight, compact MYJG-50W laser power supply is easy to operate. It is highly compatible with a variety of 50W CO lasers, including both active-high and active-low machines.
Page 3
• Just like your CO laser, this power supply should be kept in a room with environmental control to ensure proper operation. The acceptable tempera- ture range for this device is 22 to 149℉ ( 30 to 65℃). The acceptable humidity is ≤85%.
Page 4
The second connects your laser power supply to the control s ystem. Just like the first , if you have an identical one already set up, you can simply plug in your old scr ew terminal block directly. Otherwise, take care to install the wiring correctly H: Connection for Active-High Devices L: Connection for Active-Low Devices P: Line to the Laser Trigger, Water &...