Table of Contents
Advertisement
Tap [Peaking] to show or hide peaking.
Tap [Peaking color] to select a peaking color.
Tap [Level calibration] to calibrate the standard for the horizontal plane to fix deviations in the direction of tilt.
Tap [Remaining memory format] to switch the unit for displaying the remaining memory between the remaining
recordable time and the remaining memory capacity.
Tap [Audio settings] to select a microphone, reduce wind noise, or change the audio level.
Tap [Assign shutter button] to use the shutter button as a REC button or a Grab button. When [Record] is
selected, you can start recording by pressing the shutter button even if a setting dialog is open.
Tap [Assign volume buttons] to use the volume button as a REC button, volume button, or manual focus button.
When [Record] is selected, you can start recording by pressing the volume button even if a setting dialog is open.
Tap [REC button position] to change the position of the REC button and the Grab button.
You can register and recall recording settings. Tap [Save current settings], select a slot, confirm the settings, and
then tap [Save] to register often-used combinations of modes and settings. To apply the saved settings, tap
[Memory recall settings], select the desired slot, and then tap [Apply].
Tap [Tutorial] to view a tutorial for Cinema Pro.
Tap [Tips] to access the Cinema Pro tips website.
Tap [Accessibility] to display a link to accessibility information.
4.
Clip settings – Parameters to adjust for each video clip.
Tap [Look] to adjust the ambience of the video clip.
Tap [FPS] to adjust the frame rate. Select [120] to record a video in slow motion.
Tap [Lens] to select a lens.
Tap [ISO] to adjust the ISO value. Tap [Auto] when it is orange to adjust to the appropriate ISO value
automatically. You can change the ISO value while recording.
Tap [WB] to adjust the white balance. You can use the sliders to adjust the white balance. Tap [Reset] to reset the
slider values for the selected setting.
To adjust the white balance according to a selected white area, select [Custom 1]/[Custom 2]/[Custom 3], tap
[Set], hold your device so that the white area fully covers the frame in the center, and then tap [Set] again.
If you select [Auto], you can set whether to lock the white balance settings.
To switch the displayed options between the preset mode and temperature mode, tap
mode].
Tap [Shutter] to adjust the shutter speed. Tap [Auto] when it is orange to adjust the appropriate shutter speed
automatically.
Tap [Focus] to adjust the focus. Tap [AF] or [MF] to switch the focus mode to auto or manual. When the focus
mode is set to manual, you can adjust the focus markers and speed of focus pulling by tapping
icon). When the focus mode is set to auto, you can specify the focus area by tapping the viewfinder.
5.
Tap to start or stop recording.
6.
Tap to capture the current frame as a still image.
7.
Tap to hide or show the frame lines, grid lines, Metered Manual, and histogram.
8.
Status indications
Tap orange parameters to change settings.
9.
Level meter
Level meter helps you to measure the angle of the device and keep the picture horizontal. When your device senses
that it is level, the level meter turns green.
10.
Time code (hours: minutes: seconds: frames)
11.
Thumbnail
Tap a thumbnail to view a video clip or still image. Swipe left or right to view the previous or next video clip or still
image.
To return to the Cinema Pro home screen, swipe down on the screen or tap
129
(Menu icon) > [WB
(Settings
(Back button).
Advertisement
Table of Contents
