Table of Contents
Advertisement
Quick Links
R
R
C
C
By selecting this VC product you have chosen a professional
device, which guarantees highest possible quality and
Please read the following instructions carefully before
comissioning the product in order to be able to take full
advantage of all quality features regarding this product line.
Network Video Recorder
Änderungen in Technik, Design und Ausstattung vorbehalten
Installations- und Betriebsanleitung
Mounting and Operating Manual
Dear Customer!
reliability.
Art.no. 16835
Art.no. 16836
Art.no. 16837
Art.no. 16838
Art.no. 16839
Art.no. 16840
All contents of this document may change without prior notice
©
MO_16835/19.01.2015
MO_14511-K
Advertisement
Table of Contents
Summary of Contents for VC 16835
- Page 1 Installations- und Betriebsanleitung Mounting and Operating Manual Dear Customer! By selecting this VC product you have chosen a professional device, which guarantees highest possible quality and reliability. Please read the following instructions carefully before comissioning the product in order to be able to take full advantage of all quality features regarding this product line.
-
Page 3: Table Of Contents
USER MANUAL Contents SAFETY INSTRUCTION ..................4 CHAPTER 1 OVERVIEW OF NVR................. 1 1.1F ........................1 RONT ANEL NVR Front Panel（For reference only） .............1 .........................2 EAR ANEL NVR Rear Panel（For reference only） ..............2 ) ..............2 ... - Page 4 USER MANUAL 5.3.2 Playback......................28 5.3.3Parameter Setting..................30 5.3.4 Local Setting....................38 5.3.5 Logout......................38 CHAPTER 6 APPENDIX ..................39 6.1T ......................39 ROUBLESHOOTING ....................40 SAGE AINTENANCE 6.3S ..................41 YSTEM ONNECTION IAGRAM...
-
Page 5: Safety Instruction
USER MANUAL SAFETY INSTRUCTION Please carefully read the following safety instruction so as to avoid personal injuries and prevent the equipment and other connection devices from being damaged. 1. Power sources (note: please use the power supply attached or specified by the manufacturer) Never operate the equipment by unspecified power supply. -
Page 6: Chapter 1 Overview Of Nvr
用户手册 Chapter 1 Overview of NVR 1.1Front Panel P.S：NVR is short for Network Video Recorder. NVR Front Panel（For reference only） Key title Item Remark Function & Description Indicator Power Indicator If the “Green” indicator is on, NVR is getting power normally. IR Receiver Receive IR signal from Remote Controller. -
Page 7: Rear Panel
USER MANUAL 1.2 Rear Panel NVR Rear Panel（For reference only） Item Physical Port Connection Method Power Port Startup and shutdown Power Switch Connect the attached power supply USB Port Connect USB devices, such as USB mouse and USB flash disk. Sensor/Alarm Connect to sensor or alarming device HDMI Port... -
Page 8: Chapter 2 Nvr Connection
USER MANUAL Chapter 2 NVR Connection 2.1HDD Installation Caution: Please do not take out hard drive when NVR is running! HDD Installation: (1) Cut power firstly, and then remove screws on both sides and rear panel and open NVR upper cover. (2) Connect HDD data cable and power cable to the main board. - Page 9 USER MANUAL in Picture3-2. Wizard setting menu includes ： Homepage, Network setup, IPC setup, Record Schedule and hard disk maintenance.. 1．Homepage and network setup. In network setup page, user may set the network of NVR. Picture3-2 Picture3-3 2、IPC Setup（Picture3-4）. In this page, user may add and delete IPC; Record Schedule (Picture3-4).
-
Page 10: Chapter 4 Nvr Menu
USER MANUAL 3.2Main Interface Picture3.2-1 Note: When internal HDD is not connected to NVR, When internal HDD is not connected to NVR or the HDD is not formatted,first channel of the live screen and accompany buzzer alarm. If you want to close the buzzer alarm, please enter into [EventAlarm] to set HDD loss, HDD space not enough and alarm output to “off”. -
Page 11: Main Menu Guide
USER MANUAL 4.1 Main Menu Guide IP Camera Live Display Output Privacy Zone Record Schedule Record Mainstream Parameter Substream Network Network Email DDNS Motion Alarm Main Menu Alarm Record Search Record Search Event Search Device General Users System Info Maintain Advanced Events Shutdown... -
Page 12: Main Menu
USER MANUAL 4.2Main Menu On LIVE mode, click the mouse button, or [Menu] button on the remote controller, or click [ ] icon on the toolbar to enter the main menu screen, as shown in Picture 4-2. If system interface is locked, refer to section 4.3 to unlock by inputting password. - Page 13 USER MANUAL 4.2.1.1.2 Live Go to“Main Menu”→“Display”→“Live” to enter into the interface shown as Picture4-5. Channel：Select channel number. Show Time：Tick the checkbox to display time. Channel Name：Name marked on IPC Date Format：Set date format such as m/d/y or y/m/d ...
-
Page 14: Record
USER MANUAL 4.2.1.1.4 Privacy Zone Privacy Zone is for setting some invisible parts in the selected channel, as shown in Picture4-8 and Picture4-9. 1. Select the number of the zone to be set (maximum 4 zones can be set for single channel) 2. - Page 15 USER MANUAL 4.2.1.2.2 Schedule Go to “Main Menu”→“Record”→“Schedule” to enter into the Schedule interface shown as Picture4-11 and set the record schedule of NVR. Select the channel and the date to be set. One week’s schedule can be set. The record schedule of the current channel can be copied to any other channel or all channels.
-
Page 16: Network
USER MANUAL 4.2.1.3 Network 4.2.1.3.1 Network Go to“Main Menu”→“Parameter”→“Network” to enter into the interface shown as Picture 4-13. Select a kind of network connection (PPPOE, DHCP,Static) and set Port, then user may remotely control the monitoring, recording, playback or backup of NVR through network, as shown in Picture 4-13. - Page 17 USER MANUAL 4.2.1.3.3DDNS Go to“Main Menu”→“Parameter”→“Network”→“DDNS”to enter into the menu interface. User may set DDNS in any one of the above network connection after applying dynamic domain service. User may remotely access NVR through domain by using browser in the form of http://applied domain: mapped Web port number.
- Page 18 USER MANUAL Area：Click it to enter into the interface shown as Picture 4-16-2 to set the motion detection area to be monitored intensively. A single channel is divided into 15ⅹ12（PAL）or 15ⅹ10（NTSC）configurable grids. The red grids indicate that the motion detection in the area is enabled, white semitransparent ones indicates that the motion detection in the area is disabled.
- Page 19 USER MANUAL 4.2.2 Record Search 4.2.2.1Record Search Go to “Main Menu”→“Record Search”→“Record Search” to enter into the interface shown as Picture 4-18 Channel:Select the channel you want to search. Type:Select the type the playback record. There are two options, i.e. Normal and Alarm. ...
- Page 20 USER MANUAL Detailed operation： Fixed time axis: If you select [ ] option, that means the processing control bar cover two-hours video content. The time range refers to 1 hour before and after the middle point. 2）Record clip and backup function and playback zoom in/out function. Picture 4-21-1 Picture 4-21-2 ...
- Page 21 USER MANUAL Picture 4-24 Picture 4-23 If you want to back up with USB, select USB and click OK to start processing and you may see the backup progress shown as Picture 4-23. If you want to back up with DVD, select DVD and click OK to start processing and you may see the backup progress shown as Picture 4-24.
- Page 22 USER MANUAL : Play: Click to play file : Pause: Click to pause. : Stop: Click to stop playback. : Next: Click to play next file. : Previous: Click to play previous file ： Slow Playing: click to play at 1/2,1/4,1/8,1/16 speed. ：...
-
Page 23: Device
USER MANUAL 4.2.3 Device Go to “Main Menu”→“Device”→“HDD” to enter into the interface shown as Picture 4-28. When NVR is connected to a HDD, the system will automatically detect if HDD is normal or not; If HDD need to be formatted, status will be shown as “Not formatted”. - Page 24 USER MANUAL 4.2.4 .1System 4.2.4.1.1 General Go to“Main Menu”→“System”→“General” to enter into the interface shown as Picture 4-31. User maysetDate, Time, Date Format, Time Format, Language, Video Format, Menu Timeouts and Show Wizard in this page. Picture 4-31 4.2.4.1.2DST Go to“Main Menu”→“System”→“General”→“DST”to enter into the interface shown as Picture 4-32.
- Page 25 USER MANUAL Picture 4-33 4.2.4.2 Users Go to“Main Menu”→“System”→“Users”to enter into the User interface shown as Picture 4-34. It supports up to seven users, including one administrator and six users. Click [Edit] button to enter into the [User Edit] interface to input user name and password, as shown in Picture 4-35.
- Page 26 USER MANUAL Picture 4-37...
-
Page 27: Log
USER MANUAL 4.2.4.3.2 Channel Info Go to“Main Menu”→“System”→“Info”→“Channel Info”，as shown in Picture 4-38 User may view the information of various connected IPC, including state, mainstream, substream, motion detection, privacy zone, cruise, etc. Picture 4-38 4.2.4.4 Log Go to“Main Menu”→“System”→“Log”, as shown in Picture 4-39. Picture 4-39 User may search log information in different period of time. -
Page 28: Shutdown
USER MANUAL Load Default: If [Load Default] is selected, you can initialize the system to the ex-factory default. Click “Load Default” and select items to be restored Load Settings: Load parameters in the removable storage device to NVR. ... -
Page 29: Menu Lock
USER MANUAL 4.3Menu Lock In consideration of system safety, user may click the icon on the toolbar when he leaves away from NVR and the system interface will be locked. User has to input Device ID, User Name and Password on the login interface to unlock(Default: User Name: admin, Password: blank). -
Page 30: Chapter 5 Web Application Manager
USER MANUAL Chapter 5 Web Application Manager ActiveX control download and installation Open your web browser and input the IP address of NVR, such as: http://192.168.1.168 . If your computer is connected to internet, it will download and install “ActiveX” plug-in automatically. If your computer system is Windows Vista or Windows 7, you may need to setup the user authority for remote control, or you may be unable to backup or record. -
Page 31: Web Application Manager Login
USER MANUAL 5.2 Web Application Manager Login After ActiveX controls installation, please input user name and password, select Main Stream or Sub Stream (In general, select main stream for intranet and sub stream for outer net), and select language in the interface shown as picture 5-2. There is an option for opening all channel preview, select it to open all live pictures. -
Page 32: 1Menu Bar
USER MANUAL 5.3.1Menu Bar Menu Bar: Live, Replay, Configuration, Local Setting and Logout 5.3.1.1Live Display Log in the Web Application Manager, system will be defaulted to enter into <Live> interface shown as Picture 5-3. You can click [Play] button to Open/close live images, on-spot record, capture, and many live display modes. -
Page 33: Playback
USER MANUAL ：Adjust the chromaticity of video ：Adjust the brightness of video ：Adjust the contrast of video ：Adjust the saturation of video 5.3.2 Playback Click to enter into Playback interface to remotely view the records in NVR HDD, as shown in Picture 5-6. Picture5-6 It supports 4 channels playback. - Page 34 USER MANUAL in Picture 5-7. On the time axis, red part stands for alarm record, yellow stands for normal record and original part stands for no record during this period. Picture 5-8 Before playback, choose to enable playback 4 channels synchronously. If you tick-select “...
-
Page 35: 3Parameter Setting
USER MANUAL *.264 format. Snapshot function Move the mouse curse to the channel you want to capture, and click [ ] icon to capture the live images remotely. After capturing the images successfully, a path prompt box will be popped up, as shown in Picture 5-10. Picture 5-10 The captured file will be saved as .bmp format. - Page 36 USER MANUAL on the screen on Live mode. Picture 5-12 2.IP Camera：Display the information of added IPC. It can quickly add the on-line IPC and delete the added IPC, as shown in Picture 5-13. Picture 5-13 3. Privacy Zone: Each channel can set 4 privacy zones, as shown in Picture 5-14. The relevant parameters should be consistent with NVR local setting.
- Page 37 USER MANUAL shown in Picture 5-15. Picture 5-15 2. Record Schedule. The parameters should be consistent with NVR local setting, as shown in Picture 5-16. Picture 5-16 Green stands for Normal record; Yellow stands for Motion detection; Red stands for I/O trigger record.
- Page 38 USER MANUAL successfully, NVR will automatically restart. Picture 5-18 2. Email: Set NVR alarm Email configuration parameters, including Email address, SSL, Email Enable, Interval and Email Schedule, etc. Detailed parameters should be consistent with NVR local setting. Refer to Picture5-19. Picture5-19 3．DDNS: After user applies for DDNS service, you could enable <DDNS>...
- Page 39 USER MANUAL 5.3.3.4 Alarm Alarm setting includes Motion Detection and I/O Alarm Parameters. Motion Detection: Configure Sensitivity, Alarm out, Alarm Record and Alarm Capture, etc. Detailed setting should be consistent with NVR local setting (Shown as Picture 5-21). Picture 5-21 I/O alarm setting (If available): Set parameters for I/O Alarm, Alarm Out, Alarm Record, Send Email, etc.
- Page 40 USER MANUAL 2. PTZ User may set the relevant parameters of PTZ. Detail setting should be consistent with NVR local setting. Please refer to Picture 5-24. Picture 5-24 5.3.3.6 System Click <System> option to unfold its sub-options: General, Users and information. 1.
- Page 41 USER MANUAL 3. Information User may search device name, device number, device type, MAC address, software version, IE version and hardware version of NVR shown as Picture 5-27. Picture 5-27 5.3.3.7 Advanced Click Advance to unfold its sub-options: FirmwareUpdate, Load default, Events and Maintain.
- Page 42 USER MANUAL Secondly, click “Start” to start updating. The updating progress can be seen on the screen, as shown in Picture 5-30. Picture 5-30 2. Load Default User may remotely restore default parameters of NVR, with same setting method as that of NVR, shown as Picture 5-31.
-
Page 43: Local Setting
USER MANUAL Picture 5-32 4. Maintain Allow you remotely set auto maintain time for NVR shown as Picture 5-33. Detailed setting should be consistent with NVR local setting. Picture 5-33 5.3.4 Local Setting User may set Record Path (save Live record and Playback clip file), Download Path for remote file, SnapshotPath for captured pictures, Interval for switching record files (Packaging time), and File type (H264 and AVI) shown as Picture 5-34. -
Page 44: Chapter 6 Appendix
USER MANUAL Chapter 6 Appendix 6.1Troubleshooting Q: What can I do if the system does not detect the HDD? A: Check if the power supply system is properly connected and data cord and power cables are securely connected, and if something wrong with the HDD interface. Or you may check if your HDD is supported by referring to the specifications or descriptions. -
Page 45: Usage Maintenance
USER MANUAL 13. Q: Why does buzzer keep alarming? A: Please check the alarm setting, check if motion detection function is enabled and object motion is detected all the time and if I/O alarm is set as Always Off. Besides, refer to corresponding HDD alarm setting. -
Page 46: System Connection Diagram
USER MANUAL System Connection Diagram 7.2 Accessories Remote Controller Power Adapter User Manual (Good in kind prevail) USB Mouse Warranty Card... - Page 47 USER MANUAL The material in this document is the intellectual property of our department . No part of this manual be reproduced, copied, translated, transmitted, or published in any form or by any means without our department prior written permission. Our products are under continual improvement and we reserve the right to make changes without noti ce.
- Page 48 Installations- und Betriebsanleitung Your local distributor All contents of this document may change without prior notice All rights are reserved. Änderungen in Technik, Design und Ausstattung vorbehalten MO_14511-K...