Beko CM 9120 B User Manual page 30

• Child Lock
Use Child Lock function to prevent children
from tampering with the machine. Thus you
can avoid any changes in a running pro-
gramme.
You can switch on and off the ma-
chine with On / Off button when the
Child Lock is active. When you
switch on the machine again, pro-
gramme will resume from where it
has stopped.
When the Child Lock is enabled, an
audio warning will be given if the
buttons are pressed. Audio warning
will be cancelled if the buttons are
pressed five times consecutively.
To activate the child lock:
Press and hold the related auxiliary function
button for 3 seconds. After the countdown
as "3-2-1" on the display is over, Child Lock
symbol appears on the display. When this
warning is displayed, you can release the
Auxiliary Function button 3.
To deactivate the child lock:
Press and hold the related auxiliary function
button for 3 seconds. After the countdown
as "3-2-1" on the display is over, Child Lock
symbol disappears.
• Wireless Connection
You can match your machine and your
smart devices with the wireless connection.
This way, you can use your smart device to
get information about your machine and
control it.
To activate wireless connection:
Press and hold Remote Control button for 3
seconds. After countdown "3-2-1" on the
display ends, "On" symbol appears. When
this notification is displayed stop pressing
the remote control button. The wireless con-
nection icon blinks when the product is con-
necting the internet. If connection is suc-
cessful, icon will remain on.
To deactivate wireless connection:
Press and hold Remote Control button for 3
seconds. Countdown "3-2-1" will be dis-
played, and then "Off" symbol will appear on
the display.
To be able to enable wireless con-
nection, machine setup should be
completed through HomeWhiz ap-
plication. After setup, wireless con-
nection will be enabled automatically
if you press "Remote Control" but-
ton.
• Support Service 3''
Support Service is a service where you can
create a support request by clicking on the
Support Service button on your appliances
and our expert customer representatives will
contact you via the phone number you
stated on the HomeWhiz application to
provide you help with any kind of issue you
are having.
Entering a phone number for Support
Service:
After pushing and holding on the Support
Service button to create a request, you need
to have entered a phone number on the ap-
plication so that your customer representat-
ive may reach you. You may enter or edit
your phone number on the contact menu in
HomeWhiz application.
Creating a request on Support Service:
To be able to use this service, your product
needs to be added on HomeWhiz applica-
tion and connected to your home network.
1. Make sure your appliance is connected
to the Internet and your phone number
is registered on HomeWhiz application.
2. Press and hold the Support Service key
for 3 seconds.
3. Support Service symbol will start blink-
ing.
4. Once your request successfully reaches
customer services, the symbol will illu-
minate continuously.
EN / 30