Introduction
Thank you for choosing a Pulse CMX-DSP series mixer. This product has been designed to
offer reliable, high quality mixing for stage and/or studio applications with unfailing
consistency. In order to gain the best results from this equipment and avoid damage through
misuse, please read and follow these instructions and retain for future reference.
Warning:
To prevent the risk of fire or electric shock, do not expose components to rain or moisture.
If liquids are spilled on the surface, stop using immediately, allow unit to dry out and have
checked by qualified personnel before further use.
Avoid impact, extreme pressure or heavy vibration to the unit.
There are no user serviceable parts inside the mixer – refer all servicing to qualified personnel.
Safety
Check that the supplied adapter and connectors are in good condition and the mains
•
supply voltage is correct.
Ensure signal leads are of good condition without shorted connections (especially when
•
using phantom power)
Do not use the USB connector as a general purpose power source or charger.
•
Do not allow any foreign particles to enter the console through connectors or control
•
apertures
Placement
Keep out of direct sunlight and away from heat sources.
•
Keep away from damp or dusty environments.
•
Ensure adequate access to controls and connections
•
Cleaning
Use a soft cloth with a neutral detergent to clean the casing as required
•
Use a soft brush to clear debris from the control surface
•
Do not use strong solvents for cleaning the unit.
•
www.pulse-audio.co.uk
| CMX-DSP Series User Manual