First Time Auto Setup - Panasonic TX-43LX 97 Series Operating Instructions Manual

Indicator / Control panel
When pressing 4, 5, 6 buttons, the control panel guide
≥
appears on the right side of the screen for 3 seconds
to highlight which button has been pressed.
1 2, 3
Rear side of the TV
1 Power LED
Red: Standby
Green: On
• Depending on the ambient brightness,
adjusts the brightness of LED to easy-
to-view levels automatically.
Orange: Standby with some functions (recording,
etc.) active
The LED blinks when an infrared signal is received
≥
from the remote control.
2 Ambient sensor
≥ Senses ambient lighting conditions to adjust the
picture when [Auto Brightness] and [Auto White
Balance] (Picture > Ambient Sensor Settings) are
set to [On].
3 Remote control signal receiver (for infrared
communication)
≥ Do not place any objects between the TV remote
control signal receiver and remote control.
4 Input mode selection
≥ Press repeatedly until you reach the desired mode.
Menu
Press and hold for about 3 seconds to display the
≥
menu bar.
OK (when in the menu system)
5 Channel Up / Down
≥ Cursor Up / Down (when in the menu system)
6 Volume Up / Down
Cursor Left / Right (when in the menu system)
≥
7 Mains power On / Off switch
Use to switch the mains power.
≥
To turn Off the apparatus completely, you must pull
≥
the mains plug out of the mains socket.
≥ [ ]: Standby / On
22
English
4
5
6
7
First time Auto
Setup
When the TV is turned on for the first time, it will
automatically search for available TV channels and give
options to set up the TV.
These steps are not necessary if the setup has been
≥
completed by your local dealer.
Please complete connections (p. 13 - 16) and settings
≥
(if necessary) of the connected equipment before
starting Auto Setup. For information about the settings
for the connected equipment, read the manual of the
equipment.
1
Plug the TV into a live mains socket
and turn the power on
≥Takes a few seconds to be displayed.
2
Select the following items
Set up each item by following the on-screen instructions.
Example:
Please select your viewing environment.
Home
∫ How to use the remote control
Move the cursor
Access the item / store the setting
Return to the previous item (if available)
Select the language
Select your country
Select [Home]
Select [Home] for use in a home viewing environment.
≥ [Shop] is for shop display.
≥ To change the viewing environment later on, the set
will need to have all settings initialised by accessing
[Shipping Condition].
Shop