Wiring Instructions First-time Use Directions for the 100 volt connection. Dimensions (with Mounting Arm) Measuring Diagrams 11.1 Coverage SONA 6 11.2 Frequency range SONA 6 Technical Specifications EC Declaration of Conformity Accessories Disposal 15.1 Germany 15.2 EU, Norway, Iceland, and Liechtenstein 15.3...
This item is a quality accessory for the SONA 6 speaker system. As the owner of a SONA 6 loudspeaker, you now have a versatile and highly professional tool which, when operated properly, is a true pleasure to use.
User's Manual K&F SONA 6 Product Description Items Included • Loudspeaker with integrated ball joint swivel arm for wall, ceiling or stand mountings • User's Manual • 4-pin Phoenix connector for the Phoenix socket on the speaker • Grill dismantling tool...
User's Manual K&F SONA 6 Safety Instructions Mounting the Speakers / Wall and Ceiling Installation Have all installation works including suspension as well as wall or ceiling mount performed by qualified event technicians or appropriately trained persons. Only qualified technicians are permitted to perform the installation steps. Be sure to use personal protective equipment at all times.
24 dB/oct. at 60 Hz has to be inserted into the signal chain. Operations with CD 44 Controller: • For optimal performance and operating safety of the SONA 6 speakers we recommend using the system controller K&F CD 44. •...
Page 8
User's Manual K&F SONA 6 Avoid damage caused by the speakers' magnetic fields Speakers are permanently surrounded by a magnetic field, even when they are not connected. Therefore, during transport and placement of the speakers, it is important to ensure that there is a sufficient distance between the speakers and magnetic data media and computer/video monitors (except flat panels).
User's Manual K&F SONA 6 Wall and Ceiling Installation Required Tools • T25 Torx key • 16 mm spanner (only black version) • 17 mm spanner (2 x for white version) • Mounting accessories for installation on walls or ceilings...
User's Manual K&F SONA 6 Outlet for Cable and Safety elements To connect the speaker and attach a safety element, you must open the cover on the rear side of the speaker. Loosen the screws on the cover on the rear side of the speaker with a T25 Torx key.
Page 11
User's Manual K&F SONA 6 Wall Mounting of the Speaker If people can move freely under the hung speaker, you must secure the speaker with a safety element. The BGV (government safety organisation) C1 can only be fulfilled when using such a safety device.
Stand Installation To mount a SONA 6 speaker on a stand, you need the accessory Stand socket M10. For stand mounting, you do not need the provided long nuts. Unscrew them from the mounting arm and keep them for possible later use.
User's Manual K&F SONA 6 Make sure that the stand pole in the stand adapter reaches up to behind the clamp screw. Tighten the clamping screw. The speaker is now securely connected to the stand. Now adjust the speaker. Proper Alignment of the Loudspeakers Please note that precisely targeted speaker systems can significantly improve the acoustic result.
CD 44! This applies for use with and without the K&F Subwoofer. Wiring Instructions • Before connecting your SONA 6 loudspeaker switch off all equipment and turn down all level controls. • Only use high-quality speaker cables with a sufficient wire gauge. The wire gauge depends on the length of the speaker cable.
Page 15
Switch off all equipment and turn down all level controls of the mixing console and the power amplifiers. • Wire the SONA 6 systems. • Switch on the mixing console first, then the controller and the power amplifier. Always use the before mentioned switching order. Otherwise switching noises may damage the sound system.
User's Manual K&F SONA 6 Directions for the 100 volt connection. KLING & FREITAG speakers with '100 V' option are fitted with high-quality transformers. This serves to minimize loss of sound. Highly professional sound reinforcement results can be achieved using '100 Volt' KLING & FREITAG speakers.
User's Manual K&F SONA 6 13. EC Declaration of Conformity applicable to all products designated hereafter and distributed by KLING & FREITAG GmbH including model variants unless these products have been altered afterwards. Loudspeaker systems: ACCESS B5 E 90 MK II...
User's Manual K&F SONA 6 14. Accessories • 5 mm chain quick link, stamped. For use with the safety eye on the speaker. • K&F Stand Adapter, M10 15. Disposal Please recycle the packaging material of the device. 15.1 Germany Don’t dispose of waste electrical equipment through household waste.