Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for INDE MFRS500USB
Summary of Contents for INDE MFRS500USB
- Page 1 MFRS500USB LEAD FREE REWORK SYSTEM Instruction Manual Thank you for purchasing this unit. It is designed for lead free soldering & de-soldering. Please read this manual before operating the unit. Store this manual in a safe, easily accessible place for future reference.
-
Page 2: Table Of Contents
TABLE CONTENT 1. Summary…………………………………………………………………………………………...2 2. Safety Instruction………………………………………………………………………………..2 3. Specification and Characteristic…………………………………………………………………3 3.1 Soldering Iron Part …………………………………………………………………………...3 3.2 De-soldering Tool Part ………………………………………………………………………...3 3.3 SMD Rework Part …………………………………………………………………………...3 4. Prepare and Connection …………………………………………………………………………...4 4.1 Connection of the Soldering Iron Part……………………………………………………… 4 4.2 Connection of the De-soldering Tool Gun……………………………………………………5 4.3 Connection of the SMD Rework Part…………………………………………………………6 4.4 Connection of the Main Unit…………………………………………………………………6 5. -
Page 3: Summary
Ⅰ. Summary Thank you for purchasing the unit which including the soldering iron part, de-soldering gun part and SMD rework part. It is a good assistant. The three tools can work at the same time. TEMP KEY AIR KEY VACUUM KEY INFO KEY TOOL1 KEY TOOL2 KEY... -
Page 4: Specification And Characteristic
Ⅲ. Specification and Characteristic 3.1 Soldering Iron Part 3.1.1 Specification of the Soldering Part Power The temperature range of the iron 200℃~480℃ The time range of the sleeping 0~99 (unit: minute) Temperature Stability ±2℃ (Without air flow and no load) Highest Ambient Temperature 40℃... -
Page 5: Smd Rework Part
5. Temperature calibrate digitally. 6. Suction nozzle and heater are specially designed so that even the melting solder can be absorbed into the filter without frequent maintenance. High efficiency. 7. Heat resistant vacuum hose used prevents it from being burned by touching the heating parts. 3.3 SMD Rework part 3.3.1 Specification of the SMD Rework system Power... -
Page 6: Connection Of The De-Soldering Tool Gun
CAUTION: If the sponge becomes dry during working, add appropriate water. 2. Connection Connect the connector plug of the iron handle cord to the socket “TOOL1” in front of the soldering station. Take notice of the inserting position of connector plug. Place the soldering iron in the iron holder. -
Page 7: Connection Of The Smd Rework Part
2. Dampen the cleaning sponge with water and then squeeze it dry. Be sure to remove the round portion of the sponge and place it in the holder. 3. Connect the metal plug of cord assembly to the receptacle (marked“TOOL2”) . 4. -
Page 8: Temperature And Airflow Setting
set. 5. If the password is right, the displaying window will display “ ”, and then click “VACUUM” key into the menu setting state. The window shows “set”, at the time, it can change the parameters of the menu. 5.1.2 Menu and Parameters Setting 1. -
Page 9: Sleep Time Setting And Resume
5.2.1 Temperature Setting Raise temperature: Click “TEMP ▲” key and then the temperature will rise１℃, and the LCD displays the current setting temperature. If pressing “TEMP ▲”not loosely at least one second, the setting temperature will rise rapidly. Loose the “TEMP ▲ ” key until up to the needed temperature. -
Page 10: Operation
Sleeping time interface of the SMD rework tool 5.3.2 Resume from the Sleep 1. Resume of the soldering iron: 1) Click “TOOL1” key. 2) Take up the soldering iron handle from the holder. 2. Resume of the re-soldering gun: 1) Click “TOOL2” key. 2) Take up the re-soldering gun and press the red switch on it. -
Page 11: Operation Of The Soldering Iron
Click “TOOL2” key into the single displaying window of the re-soldering gun. The LCD displays “SET” and current setting temperature. Click “TEMP▲” or “TEMP▼” to set the temperature of the re-soldering gun. Re-soldering gun in sleeping Re-soldering gun in setting state Click “TOOL3”... -
Page 12: Operation Of The De-Soldering Gun
6.3 Operation of the De-soldering Gun 6.3.1 Enter or Exit from the State of the De-soldering Gun 1. Turn on the power switch, click“TOOL2” key into the displaying state of de-soldering gun and only displaying the temperature of the de-soldering gun. 2. - Page 13 Never allow the nozzle to touch the board itself. To confirm that all the solder is melted, observe the inside of the hole and the backside of the PCB. If this is difficult to do, try slowly moving the lead with the nozzle. If the lead can move, the solder is melted.
-
Page 14: Operation Of The Smd Rework System
Normal Abnormal Solution Blue or slight amount More than half of the If the indicator is more than half red, replace of red can be seen. indicator is red. the filter and clean the nozzle and the inside of the heating element. CAUTION: The results of the indicator will not be accurate if the hole of the nozzle is closed or if the solder in the hole of the PCB is not melted. -
Page 15: On Line With The Hot Plate
6.4.3 Operation NOTE: the sucking nozzle of the rework handle cannot suck chip when the de-soldering gun is sucking solder because the bump has been used by the de-soldering gun. 1. Select the appropriate nozzle to install on the handle. 2. -
Page 16: Error Messages
temperature mode of the SMD rework tool. At the moment, the digit of LCD display temperature is flashing. Press the“TEMP▲”or“TEMP e ” key to select the value and input the reading of thermometer, and the inputting method is the same as temperature setting.