Subscribe to Our Youtube Channel
Summary of Contents for cam CA99534
- Page 1 Original operating manual Operating manual Big bag handler CA99534 – CA99532 Flexibility & experience 10/2022 – V01...
- Page 2 © 10-2022. CAM attachments is a trademark of TVH Parts Holding NV, Brabantstraat 15, B-8790 Waregem. All rights reserved. No part of this publication may be reproduced or communicated in any form or by any means, electronic or mechanical, including copying, recording or use in an information storage or retrieval system, without prior and explicit permission of TVH Parts Holding NV.
- Page 3 Bulgarian Можете да намерите това ръководство на Вашия език чрез линка, посочен по – долу. Czech Tento návod najdete ve svém jazyce prostřednictvím odkazu níže. Danish Du kan finde denne vejledning på dit sprog via nedenstående link. German Sie finden diese Bedienungsanleitung in Ihrer Sprache unter folgendem Link. Greek Μπορείτε...
- Page 4 Thank you for using our product. For your safety and to ensure a correct operation, we would like to bring to your attention some aspects of this manual: • This booklet supplies useful instructions for the correct operation and maintenance of the product. It is therefore necessary to pay the utmost attention to all of the paragraphs that illustrate the simplest and most secure way to operate and use this product.
-
Page 5: Table Of Contents
CONTENTS INTRODUCTION ..................... DESCRIPTION . -
Page 6: Introduction
INTRODUCTION This manual contains all the necessary information on the installation and operation of the big bag handler. Also included in this manual are a number of safety instructions to create a safe working environment. This attachement allows you to handle big bags in an easy way. You simply attach the big bag handler to the forklift or telehandler and you’re ready to go. -
Page 7: Description
DESCRIPTION 2.1. Technical data Always check the type plate for the correct information. Type CA99534 CA99532 Load capacity (kg) 1000 1500 Max fork section height (mm) Max fork spread (over the forks) (mm) Max height (mm) Distance between claws (mm) -
Page 8: Main Components Of The Product
2.2. Main components of the product N° Component Locking pin Fork sleeves Location lugs Brand sticker 2.3. Placement of the decals The safety and warning labels should be placed as described in the pictures below. See chapter 3 for the explanation of the safety warnings. If the decals are damaged or missing, replace them. N°... -
Page 9: Type Plate
Imported in the UK by TVH UK Adress TVH UK National Distribution Centre • Zortech Avenue Kidderminster, Worcestershire • DY11 7DY CE logo UKCA logo CAM logo Type – Typ Type Model – Modèle – Modell Model Serienummer – Numéro de serie Serial number –... -
Page 10: Safety Instructions
Zwaartepunt – C.D.G. – XXX mm Zwaartepunt – C.D.G. – Centre of gravity – Eigenschwerpunkt XXX mm Centre of gravity – Eigenschwerpunkt Voorbouwmaat – Épaisseur – SAFETY INSTRUCTIONS XXX mm Voorbouwmaat – Épaisseur – Thickness – Vorbaumaß XXX mm Thickness – Vorbaumaß Nom. - Page 11 In the event that equipment, procedures, work methods or working techniques are used that are not specifically advised by the CAM attachments company, it is necessary to make sure that there is no danger to the operator or other people.
-
Page 12: Transport And Storage
TRANSPORT AND STORAGE 1. Transport If you want to transport the big bag handler on a pallet, make sure that the attachment is securely attached so that it can’t fall off. Safely transport the big bag handler by following the next steps: 1. -
Page 13: Assembly And Installation
• The assembly and installation must be carried out by an expert. • Make sure that the goods and packaging are in good condition. • Before commissioning, carry out a risk analysis on the assembly of the CAM attachment product with the lifting device. -
Page 14: Operation
• For safety reasons, arbitrary adaptations or modifications to the equipment are prohibited. • In the event of non-envisaged workmanship or intervention or following a procedure different to that indicated in the manual, consult CAM attachments before proceeding in order to ascertain its feasibility. -
Page 15: Operating Instructions
6.2. Operating instructions Please see chapter 7.2. for the daily maintenance schedule. • If it appears that the load is not stable enough or unevenly distributed in the bag, lower the big bag handler so that you can redistribute the load evenly in the bag. 1. -
Page 16: Maintenance
MAINTENANCE 7.1. Safety instructions for the maintenance of the product • Make sure you read the operating manual before carrying out maintenance. • For maintenance, place the big bag handler in its lowest position to the ground. Switch off the vehicle’s engine and remove the key. •... -
Page 17: Troubleshooting
TROUBLESHOOTING N° Problem Cause Action The big bag Wear/damage to the locking pins Replace the locking pins by new ones. handler is not securely attached to the forks The locking pins Wear/damage to the locking pins Replace the locking pins by new ones. do not fit correctly, See spare parts list attached for the so the big bag... -
Page 18: Final Decommissioning And Disposal
FINAL DECOMMISSIONING AND DISPOSAL Final, proper decommissioning or disposal of the product must be performed in accordance with the regulations of the country in which the product is used. In particular, regulations governing the disposal of batteries, fuels and electronic and electrical systems must be observed. Waste packaging should be sorted and put into solid dustbins according to the materials and needs to be collected by the local special environment protection bureau. -
Page 19: Annexes
ANNEXES 10.1. CE certificate 19/24... - Page 20 20/24...
- Page 21 NOTES ................................
- Page 22 NOTES ................................
- Page 23 NOTES ................................
- Page 24 Your distributor: Manufactured outside the EU for TVH PARTS NV. www.camattachments.com Agri info@camattachments.com Construction Industry Brabantstraat 15 Food & 8790 Waregem beverage Belgium Paper T +32 56 43 42 11 handling F +32 56 43 44 88...
Need help?
Do you have a question about the CA99534 and is the answer not in the manual?
Questions and answers