Polaris PCDH 1316 Manual Instruction page 7

Ceramic desk heater

Available languages

 The heater should be placed at the distance of 50 centimeters from any other objects and pieces of

furniture. A free space of 1 metre above the heater should be ensured for the ventilation.

 The heater should always be placed in vertical position.

 In cause of the turned over the device should be unplugged from outlet and cooled.

 Do not use nearby the highly inflammable liquid like gasoline, oil, varnish, solvent etc.

 The cord should not be placed nearby the hot surface of the appliance.

 If the power supply cord or the plug is damaged, it must be replaced by the manufacturer or its service

agent or a similarly qualified person in order to avoid a hazard.

 To reduce the risk of fire or electric shock the device is equipped with overheating detector, that switch

off the appliance automatically when the temperature is too high.

 Do not place the device on a deep-piled carpet.

 In case of the appliance damage, please contact our authorized service agents.

 Please wait for some time to cool the heater before moving. Use the handle to place the heater.

III. Description

IV. The heater operation

 The heater should always be placed in a vertical position to reduce the risk of overheating, fire or

electric shock.

 Make sure that the power regulator (3) is in O position.

 Power regulator (3) has four programmes:

 О – OFF;



– fan only, "cool air" function;

 1 – 800 watt;

 2 – 1600 watt.

 Plug the device in the outlet.

 Rotate clockwise the thermostat regulator (2) to "+" position. The power regulator mode should be

switched over from O position to

 Switch the power regulator (3) and the thermostat regulator (2) to maximum power to heat the room

quickly. When the current temperature is hot enough please rotate anti-clockwise the thermostat

regulator. From this moment, the radiator will continue to work automatically keeping the constant

temperature using efficiently the electric power.

 You can choose different heating modes according to your requests, temperature conditions and

seasons.

 Choose

programme and set the thermostat regulator (2) to maximum power to switch on the "cool

air" function.

, 1 or 2.

1. Heater grille

2. Thermostat regulator

3. Power regulator