Table of Contents
Advertisement
5.5 Auxiliary functions
Buzzer
Drying machine makes an audible warning
when the program is completed. If you don't
want the machine to make an audible warning,
press the "Buzzer button. When you press
the Buzzer button, a light will illuminate and
no audible warning will be made when the
program ends.
C
NOTE
•
You can select this function before or
after the program starts.
Dryness Level / Time level button is used
to adjust program duration while the timed
programs are selected.
Drying Level
Drying Level button is used for adjusting to
desired dryness level. Program duration may
change depending on the selection.
C
NOTE
•
You can activate this function only prior
to start of program.
End time
You can delay the end time of the program up
to 24 hours with End time function.
1.
Open the loading door and place the
laundry.
2.
Select the drying program.
3.
Press the End Time selection button and
set the delay time you wish. End Time
LED will illuminate. (When pressed and
hold the button, End Time proceeds non-
stop).
4.
Press the Start / pause button. End Time
countdown starts. ":" Separator in the
middle of displayed delay time flashes.
C
NOTE
•
You can add or remove laundry within
end time. Displayed time is the sum of
normal drying time and end time. End
Time LED will turn off at the end of
countdown, drying starts and drying LED
will illuminate.
Changing the end time
If you want to change the duration during the
countdown:
Dryer / User Manual
Cancel the program by turning the On/Off/
Program selection knob. Select the program
you want and repeat the End Time selection
process.
Cancelling the end time function
If you want to cancel the end time countdown
and start the program immediately:
Cancel the program by turning the On/Off/
Program selection knob. Select the program
you want and press the Start/pause button.
5.6 Warning indicators
C
NOTE
•
Warning indicators may vary depending
on the model of your dryer.
Filter cleaning
When the program is completed, the warning
indicator for filter cleaning turns on.
5.7 Starting the program
Press the Start/pause button to start the
program.
Start/pause and Drying indicators will illuminate
to indicate that program started.
5.8 Child Lock
The drying machine has a child lock which
prevents the program flow from being
interrupted when the buttons are pressed
during a program. When the child lock is
activated, all buttons on the panel except
the On/Off/Program selection knob are
deactivated.
Press buzzer button for 3 seconds to activate
the child lock.
The child lock has to be deactivated to be
able to start a new program after the current
program is finished or to be able to interfere
with the program. To deactivate the child lock,
keep the same buttons pressed for 3 seconds.
C
NOTE
•
When the child lock is activated, the child
lock warning indicator on the screen
turns on.
•
Child lock deactivates when the drying
machine is turned off and on by the On/
Off/Cancel knob.
15
Advertisement
Table of Contents
