Related Manuals for Tecnoinox GD4FG9
Summary of Contents for Tecnoinox GD4FG9
- Page 1 CODE 333112 MODEL GD4FG9 DESCRIPTION FREESTANDING GAS GRILL WITH WATER AND CA ST IRON GRID ON CLOSED CABINET 03-03-2023 12:30...
-
Page 2: Installation
Part 1 Installation DIRECT OR LAVA STONE GRILL General warnings The appliance described in this manual was The appliance must be used only under manufactured compliance with surveillance. Moreover, the appliance should standards. This appliance is intended only for be checked once a year by a qualified cooking food professionally and must be used technician. - Page 3 Connecting to the distribution network Before you install the appliance, make regulations in force. When installing the appliance, all the regulations in force must be observed such as sure that the gas supplier company has Safety standards. authorised installation, ...
-
Page 4: Adjusting The Airflow
Part 2 Conversion and adaptation Changing the gas supply - Conversion If the gas supply to the room where the appliance is to After each conversion or adaptation, the appliance must be installed is different from the gas it is set up for, the undergo an operating test and the supplementary plate appliance must be converted from one type of gas to must be updated according to the conversion or... - Page 5 Part 3 Fat recovery drawer Before operating the appliance and After cooking or at the end of the day starting cooking, always fill any recovery and only after the appliance has cooled tank(s) “V” (fig.2) with clean water. Do down, empty the tanks “V” (fig.2). not use the appliance with empty tanks;...
- Page 6 Replacing parts Faulty parts should only be replaced by After having removed the control panel, all the functional parts of the appliance are easily accessible. qualified personnel. Disconnect the appliance from the gas distribution network before doing any work. Only order spare parts from the manufacturer or an authorised dealer.
- Page 7 Part 4 Maintenance and cleaning Cleaning and care they may cause rust to form. For the same reason, avoid contact Cleaning operations must only be with ferrous materials. carried out once the appliance has When cleaning, avoid using abrasive paper or cloth; instead, and only in special cases, use pumice stone powder.
- Page 8 FAULTS Malfunctions are not always explained by the quality of the Unauthorised persons should never components used. These appliances are manufactured using top attempt to repair the appliance or carry out quality components. Malfunctions may be caused by voltage maintenance. Tampering with the appliance surges, or by dust or dirt infiltrating the components.
- Page 9 Safety precautions REMEMBER THAT THE APPLIANCE At least once a year, have the appliance checked by qualified personnel. The appliance must never left All the parts that come into contact with oil unattended when in use. or fat during use should be cleaned ...
Need help?
Do you have a question about the GD4FG9 and is the answer not in the manual?
Questions and answers