DeWalt DWDCGG571 Instruction Manual page 18

4. Wipe off the filter using a soft cloth. If the filter still has debris in it
after wiping, a soft brush or swab may be used.
5. Once clean, reinsert the filter into the round groove, ensuring it is
fully seated, and reattach the grease tube assembly to the grease
gun.
Accessories
WARNING: Since accessories, other than those offered by
D WALT, have not been tested with this product, use of such
e
accessories with this tool could be hazardous. To reduce the risk of
injury, only D WALT recommended accessories should be used with
e
this product.
WARNING: Extreme pressure may cause nozzle extension or
flexible hose to burst. Use only D
flexible hose instructions and warnings.
Recommended accessories for use with your tool are available at
extra cost from your local dealer or authorized service center.
ACCESSORIES
DCGG5701 1/8" NPT Grease Gun Coupler
DCGG5701-3 1/8" NPT Grease Gun Coupler 3-pak
DCGG5702 Right Angle Grease Gun Coupler
DCGG5703-42 1/8" NPT Grease Gun Hose Assembly (42") (107 mm)
DCGG5703-24 1/8" NPT Grease Gun Hose Assembly (24") (61 mm)
DCGG5704 Clear Grease Gun Cartridge Tube
WALT approved hoses and follow
e
Repairs
The charger and battery pack are not serviceable.
To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustment (including brush inspection and replacement) should
be performed by a D WALT factory service center, a D
e
authorized service center or other qualified service personnel. Always
use identical replacement parts.
WALT
e