Lighting The Fire Bowl; Extinguishing The Fire Bowl; First Aid - HOMCOM 820-307V00 Manual

Lighting the fire bowl
1. Use a long match or extended butane lighter to ignite fuel. If the fire bowl cannot ignite,
repeat the step (See Figure 3).
NOTE:
(1). Each can burns approx. 70 ~ 90 minutes, on condition that the acohol content meets or
exceeds 90%.
(2). On the initial use, flames are short. Keep burning 5 minutes, flames will reach out to a
desirable height.
(3). During the initial burn, you may smell a slight odor. The odor is temporary and will be
absent on following burns.
(4). Do not use the short butane lighter to ignite the unit to prevent from the scalding.
2. Place the hemisphere onto the base carefully and stably.
Extinguishing the fire bowl
1. Remove the hemisphere from the base.
NOTE:
DO NOT touch the areas beyond the outer metal surfaces (e.g. fuel can) to avoid the
scalding.
2. Place the extinguishing cover onto fuel can until NO flames are present (See Figure 5).
NOTE:
(1). DO NOT blow out the flames using mouth or electrical fan.
(2). DO NOT douse the flames using the water.

First Aid

Avoid contact with eyes, mucous membranes or prolonged contact with skin. May irritate
eyes.
If fuel gets in eyes, flush with water for 15 minutes, get medical attention. If ingested, do not
induce vomiting, call poison control center or a doctor.
Figure 3
Figure 5
Figure 4
3