Advertisement
Quick Links
Instruction
assembly
FMB920 GATE CONTROL MODULE
v 6/22/20
WARNINGS
Please read this manual before proceeding with the installation. All connection
operations must be performed without the power supply connected. For security
reasons, the module should be installed by specialists with appropriate qualifications.
It is not allowed to interfere with the structure or carry out independent repairs.
Advertisement
Related Manuals for Teltronika FMB920
Summary of Contents for Teltronika FMB920
- Page 1 Instruction assembly FMB920 GATE CONTROL MODULE v 6/22/20 WARNINGS Please read this manual before proceeding with the installation. All connection operations must be performed without the power supply connected. For security reasons, the module should be installed by specialists with appropriate qualifications.
-
Page 2: List Of Devices
5. SPAMEL LK\269 limit switch (one or 2 pcs. depending on the user's requirements regarding information on the gate status) - optional * no additional devices can be purchased from Treesat except for the FMB920 gate control module. 2. DESCRIPTION To meet the expectations of the dynamically changing market of mobile services, Treesat Sp. - Page 3 (and will provide a verification code to be entered in the assembly report) 4. ASSEMBLY OF THE DEVICE Attention! Install the FMB920 module away from metal elements, with the printed side facing the outside of the housing. TECHNICAL SPECIFICATION of the FMB920 module ●...
- Page 4 This connection scheme requires additional devices (12V power supply and gate opener relay, possibly optional status switches) which are not included in the kit. The diagram below shows the preferred connection of the Click2open FMB920 module to the gate control panel.
- Page 5 Connect the closed gate limit switch to the gray FMB920 wire, and connect the open gate limit switch to the yellow FMB920 wire. We can also connect only one signal, e.g. a closed gate - in this case we lose information about the gate movement, which will be displayed as an open gate.
- Page 6 Connect the closed gate limit switch to the gray FMB920 wire, and connect the open gate limit switch to the yellow FMB920 wire. We can also connect only one signal, e.g. a closed gate - in this case we lose information about the gate movement, which will be displayed as an open gate.
- Page 7 4C. EXAMPLE OF CONNECTION DIAGRAM IF 230V VOLTAGE IS NOT AVAILABLE AND 12-24VDC IS AVAILABLE Attention! Connection does not require any additional accessories. FMB920 is connected directly to the gate controller. Before connecting, check whether the accessory power supply output has sufficient current capacity (min.
- Page 8 We connect the signal to the gray FMB920 wire when the gate is closed, and to the yellow FMB920 wire we connect the signal when the gate is open.
- Page 9 5. APPLICATION Click2open App Download The Click2open application for Google Android can be downloaded from the Google Play store, and for Apple iOS - from the Apple iTunes Store. Using the appropriate reader on your phone, use the link in the QR code. The selection page will open. Requirements For the correct operation of the application, a mobile device (smartphone, tablet) with the Google Android operating system version 6.0 or higher or an Apple mobile device with the...
- Page 10 7. MARKINGS Treesat Sp. z o. o. has used all the possibilities available to it to provide the most up-to-date information about its products. Treesat Sp. z o. o. makes no warranties related to the content of this manual and disclaims any implied warranties regarding its market value or suitability for specific purposes.
- Page 11 The symbol of the crossed-out waste bin attached to the product means that the product is covered by the European Directive 2002/96/EC. Information on separate collection points for waste electrical and electronic products can be obtained from the place of residence.
Need help?
Do you have a question about the FMB920 and is the answer not in the manual?
Questions and answers