Operation; Starting The Engine - Yamaha YFZ 2018 Owner's Manual

EBU19882
EBU19902
Read the Owner's Manual carefully before riding
the ATV. If there is a control or function you do not
understand, ask your Yamaha dealer.
EWB00632
WARNING
Read the Owner's Manual carefully to become
familiar with all controls in order to help pre-
vent any loss of control, which could cause an
accident or injury.
EBU29954

Starting the engine

ECB00151
NOTICE
See the "Engine break-in" section on page 6-4
prior to operating the engine for the first time.
1. Set the parking brake.
2. Turn the key to "
switch to " ".
The following warning lights should come on
for a few seconds, then go off.

OPERATION

" (on) and the engine stop
 Coolant temperature warning light
 Fuel level warning light
 Engine trouble warning light
ECB00826
NOTICE
To avoid possible damage, do not operate the
ATV if a warning light does not work as de-
scribed above.
3. Shift the transmission into neutral. The neutral
indicator light should come on, if it does not
come on, have a Yamaha dealer check the
electrical circuit.
TIP
This model is equipped with an ignition circuit cut-
off system. The engine can be started under the
following conditions.
 The transmission is in neutral.
 The clutch is disengaged with the transmission
in gear. However, it is recommended to shift
into neutral before starting the engine.
4. Completely close the throttle lever and start
the engine by pushing the start switch.
6-1
6