Sunna Design EVERGEN M Series Installation Manual

Dual panel side mount

Advertisement

Quick Links

EVERGEN M SERIES
DUAL PANEL SIDE MOUNT INSTALLATION GUIDE
Document: 88150_INSTALL_SOL_Dual_Panel_Side_Pole_Mount_RevB
Sol by Sunna Design | 990 Biscayne Boulevard, Office 701, Miami, FL 33132, USA | 1.800.959.1329 | customerservice@solarlighting.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EVERGEN M Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Sunna Design EVERGEN M Series

  • Page 1 EVERGEN M SERIES DUAL PANEL SIDE MOUNT INSTALLATION GUIDE Document: 88150_INSTALL_SOL_Dual_Panel_Side_Pole_Mount_RevB Sol by Sunna Design | 990 Biscayne Boulevard, Office 701, Miami, FL 33132, USA | 1.800.959.1329 | customerservice@solarlighting.com...
  • Page 2 The provided banding will work on 2" to 4.5" poles. For poles with a diameter greater than 4.5", you will need to source your own 1/2" banding materials Sol by Sunna Design | 990 Biscayne Boulevard, Office 701, Miami, FL 33132, USA | 1.800.959.1329 | customerservice@solarlighting.com...
  • Page 3 Using 5/16-18 hardware, hand tighten all nuts and bolts for adjustment later. Tilt Angle (°) Channel Distance on Center (in) 33.75 39.50 46.25 Sol by Sunna Design | 990 Biscayne Boulevard, Office 701, Miami, FL 33132, USA | 1.800.959.1329 | customerservice@solarlighting.com...
  • Page 4 Use the table below for the correct length and overlap based on specified tilt. Tilt Angle (°) X – Support Length (in) Y – Overlap (in) Sol by Sunna Design | 990 Biscayne Boulevard, Office 701, Miami, FL 33132, USA | 1.800.959.1329 | customerservice@solarlighting.com...
  • Page 5 Adjust bottom clips evenly so that the center of the PV rail mounting slots are 33.5" apart at the bottom of the PV rail. Tilt Angle (°) Hole Position Sol by Sunna Design | 990 Biscayne Boulevard, Office 701, Miami, FL 33132, USA | 1.800.959.1329 | customerservice@solarlighting.com...
  • Page 6 Mount PV panel onto the bottom section of the PV rails. Secure with remaining hardware and tighten to 84 in-lbs. Secure loose PV harnessing with ties. Tighten all loose hardware to 144 in-lbs. Double check previously tightened hardware. Sol by Sunna Design | 990 Biscayne Boulevard, Office 701, Miami, FL 33132, USA | 1.800.959.1329 | customerservice@solarlighting.com...
  • Page 7 990 Biscayne Boulevard, Office 701, Miami, FL 33132, USA Phone: 1.772.286.9461 1.800.959.1329 (Toll Free in U.S. and Canada) Email: customerservice@solarlighting.com Website: solarlighting.com Document: 88150_INSTALL_SOL_Dual_Panel_Side_Pole_Mount_RevB Sol by Sunna Design | 990 Biscayne Boulevard, Office 701, Miami, FL 33132, USA | 1.800.959.1329 | customerservice@solarlighting.com...

Table of Contents