Table of Contents
Advertisement
Installation method (1)
Accessories:
Mounting plate: 1piece
Screw M5*10MM: 2pcs
Expansion screws M8*80MM: 4pcs
Screw M4*8MM: 2pcs
Installation method:
①4 holes(red) by M8*80MM to fix mounting piece on the
wall;
②Install 2pcs M5 screws at the yellow hole of the charger,
hang the charger on the yellow hole of the wall mounting
piece, and pull it down to ensure that the screw is hung in the
yellow hole.
③Remove the shell of the charger, install M4 screws in the
green hole inside the charger to fix；
④Install the charging station housing.
4. Operations
4. Wi-Fi Operations
Open the smart home application and use the add device. Follow the instructions and add you home
Wi-Fi by selecting the SSID and entering your Wi-Fi password. Once connected the charger will show
up in the list of devices add the charger
Note the Bluetooth is only used for connecting the charger to your Wi-Fi and to obtain data from the
application in the background. The charger cannot be connected to Bluetooth as a paired device
If you are out of range to your Wi-Fi the charger cannot work with the applications on your phone.
4.1 Preparation Before Use
1) Ensure that there are no open flames around the station and the surrounding space is open without
any blockages.
2) Ensure that the charging station body and charging cable are intact.
Installation method (2)-no need mounting piece:
Accessories
Expansion screw M6 * 40MM: one piece
Expansion Screw M4*8MM: 2pcs
Installation method:
①install one expansion screw M6 * 40MM, and
extend out of the wall for 3MM-4MM;
②Hang the blue top position at the protruding
expansion screw and pull it down to ensure that the
screw is at the top of the blue hole.
③Remove the shell of the charger, install M4
screws in the green hole inside the charger to fix；
④Install the charging station housing.
Advertisement
Table of Contents
