Advertisement
Table of Contents
OVERVIEW
This unit is an advanced detector. It can be used to detect and locate
•
studs, scan for nails, pipes and other hidden metallic objects and
detect live wiring.
•
NOTE: Detection depth is nominally 19mm but can vary due to the
moisture content of materials, wall texture, paint, etc.
•
The surface of wall which you are scanning should be flat and dry
Stud Detector
Model: D03056
Advertisement
Table of Contents
Summary of Contents for Duratool D03056
- Page 1 Stud Detector Model: D03056 OVERVIEW This unit is an advanced detector. It can be used to detect and locate • studs, scan for nails, pipes and other hidden metallic objects and detect live wiring. • NOTE: Detection depth is nominally 19mm but can vary due to the moisture content of materials, wall texture, paint, etc.
- Page 2 OPERATION Place the unit against the wall. Press and hold down the POWER • button, the unit starts calibration process. The first red LED and the green LED lights and when you hear a bleep the calibration is complete. • Continue to hold down the POWER button throughout the following procedures.
Need help?
Do you have a question about the D03056 and is the answer not in the manual?
Questions and answers