Advertisement
Available languages
Available languages
MAINTENANCE
If the supply cord is damaged, it must be replaced by the manufacturer, its agent or similarly
qualified persons in order to avoid hazard.
WARNING
This appliance is intended only for drying textiles washed in water.
THE CLOTHES DRYER IS ONLY ALLOWED TO BE INSTALLED AT A DISTANCE OF AT
LEAST 0.6M FROM BATH TUBES SHOWERS.
PLS DO NOT PUT HEAVY OR MORE THAN 5KGS PRODUCTS ON THE CLOTHES
DRYER.
PLS DO NOT PUT THE QUILT COVER THE WHOLE PRODUCT'S SURFACE TO AVOID
HIGH TEMPERATURE INSIDE.
INSTALLATION (ECD25)
1) Free standing See Figure 1
1. Towel rail
2. Timer setting indicator (2/4 godziny)
3. Power cord
4. Foot base
5. Secure by screw
2) Wall mounted See Figure 2
1. Put on the decorative cover
2. Mount the wall brackets with screws
Caution: in order to avoid a hazard for very young children,this appliance should be
installed so that the lowest heated rail is at least 600 mm above the floor.
ECD30 / ECD35 DESCRIPTION
ECD30 ON/OFF switch See Figure 3
Scheme See Figure 4:
1. On/off switch (ECD30) | Control panel (ECD35)
2. Power cord
3. Move sliding rod
12
Advertisement
