Beko B5WT512410W User Manual page 29

This is not a washing programme.
This is a maintenance programme.
Do not turn this programme on
when there is something inside the
machine. When you attempt to op-
erate, the machine automatically
senses that there is load inside, and
may quit or resume the programme
as per the model of your machine.
An effective cleaning is not
achieved if the programme is re-
sumed.
• Anti-Crease+
This function is selected when the relevant
Auxiliary function button is pressed and
held for 3 seconds and the programme fol-
low-up light for the relevant step turns on.
When the function is selected, the drum ro-
tates for up to 8 hours for preventing the
laundry from creasing at the end of the pro-
gramme. You can cancel the programme
and take your laundry out at any time dur-
ing the 8-hour duration. Press the function
selection key or the machine on/off key to
cancel the function. The programme follow-
up light will remain on until the function is
cancelled or the step is complete. If the
function is not cancelled, it will be active in
the subsequent washing cycles as well.
• Extra Rinsing
This function can be selected by pressing
and holding the related auxiliary function
button for 3 seconds.
This function enables the product to make
additional rinsing in addition to the one
already made after the main wash. Thus,
the risk for sensitive skins (babies, allergic
skins, etc.) to be effected by the minimal
detergent remnants on the laundry can be
reduced.
• Child Lock
Use Child Lock function to prevent children
from tampering with the machine. Thus you
can avoid any changes in a running pro-
gramme.
You can switch on and off the ma-
chine with On / Off button when the
Child Lock is active. When you
switch on the machine again, pro-
gramme will resume from where it
has stopped.
When the Child Lock is enabled, an
audio warning will be given if the
buttons are pressed. Audio warning
will be cancelled if the buttons are
pressed five times consecutively.
To activate the child lock:
Press and hold the related auxiliary func-
tion button for 3 seconds. After the count-
down as "3-2-1" on the display is over, Child
Lock symbol appears on the display. When
this warning is displayed, you can release
the Auxiliary Function button 3.
To deactivate the child lock:
Press and hold the related auxiliary func-
tion button for 3 seconds. After the count-
down as "3-2-1" on the display is over, Child
Lock symbol disappears.
• Bluetooth
You can use the bluetooth connection func-
tion to pair your machine with your smart
device. This way, you can use your smart
device to get information about your ma-
chine and control it.
To activate bluetooth connection:
Press and hold Remote Control function
button for 3 seconds. Countdown "3-2-1"
will be displayed, and then Bluetooth icon
will appear on the display. Release Remote
Control function button. The bluetooth icon
will flash while the product is pairing with
smart device. If connection is successful,
icon will remain on.
To deactivate bluetooth connection:
Press and hold Remote Control function
button for 3 seconds. Countdown "3-2-1"
will be displayed, and then Bluetooth icon
will disappears on the display.
EN / 29