Guidance, Routing - Honda CR-V 2020 Navigation Manual

uuTroubleshootinguGuidance, Routing

Guidance, Routing

Problem
The navigation system does not route me the same
way I would go or the same way as other mapping
systems.
The street I'm on is not shown on the map screen. The mapping database is constantly undergoing revision.
The vehicle position icon is not following the road.
How do I stop the map from rotating as I drive
along?
The "Arrival time" display sometimes increases
even though I am getting closer to my destination.
My elevation (shown when I display the current
position) seems to fluctuate even though my
elevation has not changed.
My elevation is missing on the "current position"
screen.
124
The navigation system attempts to generate the optimal route. You can change the
route preferences used when calculating a route.
2 Recalculate Using Another Route Preference P. 103
Check that the GPS antenna (located in the dashboard) is not blocked. For best
●
reception, remove items from the dashboard, such as radar detectors, cellular
phones, or loose articles.
Metallic tinting or other aftermarket devices can interfere with GPS reception.
●
Please consult your dealer.
2 GPS P. 128
1. Select (Map) and then press the
2. Select Settings > Map & Vehicle > Driving Map View.
3. Check that Driving Map View is set to Track Up or 3-D.
4. Select North Up and then select Save.
The "Arrival time" is based on the speed limit on each road. Depending on the
traffic conditions, the "Arrival time" may be calculated to be earlier or later.
This is normal. The elevation can vary ±100 ft (30 m) due to GPS calculation errors.
2 GPS P. 128
The elevation is only displayed if the GPS antenna can receive signals from at least
four satellites. Try moving the vehicle into an open area. The elevation is also not
displayed if the calculated elevation is zero or below sea level.
Solution
(Back) icon.