Advertisement
Quick Links
TANKERS
OPERATING & SAFETY INSTRUCTIONS
For all spare parts please visit:
www.marshall-trailers.co.uk
For all ST1200 / ST1400 / ST1600 / ST1800
ST2000 / ST2300 / ST2550 / ST3000 models
Charles J. Marshall (Aberdeen) Ltd
Chapel Works, Bucksburn, Aberdeen AB21 9TL
Telephone: 01224 722777
Email: admin@marshall-trailers.co.uk
www.marshall-trailers.co.uk
Website:
Advertisement
Related Manuals for Marshall Amplification ST3000
Summary of Contents for Marshall Amplification ST3000
- Page 1 OPERATING & SAFETY INSTRUCTIONS For all spare parts please visit: www.marshall-trailers.co.uk For all ST1200 / ST1400 / ST1600 / ST1800 ST2000 / ST2300 / ST2550 / ST3000 models Charles J. Marshall (Aberdeen) Ltd Chapel Works, Bucksburn, Aberdeen AB21 9TL Telephone: 01224 722777 Email: admin@marshall-trailers.co.uk...
- Page 3 EC Declaration of Conformity Charles J. Marshall (Aberdeen) Ltd of Chapel Works, Bucksburn, Aberdeen, AB21 9TL United Kingdom Declares that the product: Make: Charles J. Marshall (Aberdeen) Ltd Type: Marshall Tanker Model: Serial No: Conforms to the essential health & safety requirements of 98/37/EC machinery directive as amended by 2006/42/EC directive.
-
Page 4: Safety Instructions
SAFETY INSTRUCTIONS IMPORTANT SAFETY ADVICE: STOP. THINK. CALL 01224 722777 Safety First: Please read and fully understand the contents of this instruction manual, if you are in any doubt whatsoever about the safe operation of this machine, please contact Charles J. Marshall (Aberdeen) Ltd on Tel. - Page 5 OPERATING INSTRUCTIONS All Pumps fitted to Marshall Tankers, have unfortunately, to be subject to the Manufacturer’s warranty terms which are that if a Pump has worked successfully for more than three hours it cannot be regarded as being of faulty manufacture. YOUR MARSHALL TANKER HAS BEEN DESIGNED TO GIVE YOU LONG &...
- Page 6 To help prolong the life of the pump it is advisable, after every 25 working hours, to pass diesel through it. This can be done by placing the pump in the pressure position and holding the container of diesel up to the exhaust on the pump the diesel will be sucked up through the pump and will wash out the entire pump.
-
Page 7: Maintenance Instructions
ALWAYS DISENGAGE PTO SHAFT WHEN TURNING. NEVER OVERFILL TANK. TO AVOID THIS, CLOSE THE GATE VALVE WHENEVER SLURRY IS VISIBLE IN THE SIGHT GLASS. THE OVERFLOW VALVE IS THERE ONLY FOR SAFETY. MAINTENANCE INSTRUCTIONS Hubs / Bearings must be greased regularly; we recommend they are checked after the first fourteen days work, then six monthly thereafter. - Page 8 Oil maintenance instructions: Check the oil levels daily. The front part of the pump is a gearbox which should be filled to the top of the small sight glass, on the side, with SAE 90 (EP90/ISOVG220) oil. The other oil is checked by removing the dip-stick on top of the pump and filling the oil to the top, please note there is not a mark on this dip stick.
- Page 9 GATE VALVE & ACTIVATOR MAINTENANCE INSTRUCTIONS After frequent use the tension applied to the activator springs may loosen which will cause the gate valve to not close properly. This can be rectified by re-tensioning the springs accordingly. Another problem which may arise with your gate valve/activator assembly is when the gate valve does not fully open.
- Page 10 PARTS CHART NAME NUMBER COMPLETE PART NAME NUMBER PUMP PART HERTELL KD8000 069/04-8033 No.33 Lubrication Nipple KD-8000ltr Vacuum HERTELL KD8000 069/03-8000 Pump c/w Fixing Plate HERTELL KD8000 069/04-8034 No.34 Bearing Cover NAME NUMBER PUMP PART HERTELL KD8000 069/04-8035 No.35 Bearing HERTELL KD8000 069/04-8001 No.1 Screw...
- Page 11 TYRE PRESSURE CHART PART NUMBER SIZE MAX. HEIGHT SPEED MAX. TYRE PRESS. PLEASE NOTE THIS CHART IS FOR REFERENCE ONLY EACH TYRE BRAND CAN HAVE DIFFERENT RATINGS. 083-01-26-12 26 x 1200 x 12 800kg 25km/h 20psi 083-01-100-12 10.0/80x12 10ply 1000kg 30km/h 45psi 083-01-100-15...
- Page 12 Marshall Pre-delivery Inspection Check Dealer Name: Customer Name: Address & Post Code: Model: Serial Number: Check Completed Check tyre pressure (See chart on page 10) Tighten wheel nuts 18mm stud diameter = 270Nm & 22mm stud diameter = 475Nm Grease hubs Check external wheel pressure (Ensure no side movement on wheels) Check pump oil levels (Gearbox &...
Need help?
Do you have a question about the ST3000 and is the answer not in the manual?
Questions and answers