Advertisement
Description
The Dan W3-1 is a flashing lifejacket light which is activated by a water sensor
attached to the cable or manually using the on/off button.
Daniamant A/S
Industrivej 24C
DK-3550, Slangerup, Denmark
Tel: +45 47 37 38 00 Fax: +45 47 37 38 09
Email: orders@daniamant.com
www.daniamant.com
W3-1 Instruction – Issue 7 (D0685)
www.daniamant.com
Dan W3-1 lifejacket light
Installation and Maintenance Instructions
Advertisement
Table of Contents
Related Manuals for Daniamant W3-1
Summary of Contents for Daniamant W3-1
- Page 1 Dan W3-1 lifejacket light Installation and Maintenance Instructions Description The Dan W3-1 is a flashing lifejacket light which is activated by a water sensor attached to the cable or manually using the on/off button. Daniamant A/S Industrivej 24C DK-3550, Slangerup, Denmark Tel: +45 47 37 38 00 Fax: +45 47 37 38 09 Email: orders@daniamant.com...
- Page 2 The Dan W3-1 is for use on all types of lifejackets. The Dan W3-1 is supplied with a fixing clip. The clip is intended to be placed behind a strip of lifejacket material or reflective tape; the light is secured by pressing it into the clip.
- Page 3 It is recommended that the light is activated for 1 minute. Replacement The Dan W3-1 lifejacket lights have a storage life of 5 years and must be replaced by the date shown on the label. Health and safety information Dan W3-1 lights contain Lithium cells.
- Page 4 To ensure compliance with the WEEE and Battery Regulations, the Survivor Location Lights placed on the market in the UK or Denmark should be returned to Daniamant in the UK or Denmark, or deposited in your nearest WEEE Designated Collection Facility, operated by your Local Authority.
Need help?
Do you have a question about the W3-1 and is the answer not in the manual?
Questions and answers