4
SMART SYSTEM control module
Use the control panel (FIG. 4-1) to set temperatures, operating conditions, and monitor boiler operation.
Figure 4-1 Control Panel
RESET BUTTON
The information below shows the functions of the buttons
on the display:
►
MENU / ENTER =
▲
▼
SETPOINTS =
and
◄
SAVE =
●
RESET =
Access modes
User
◄
Press the
button.
Installer
Most parameters are available only to the installer, accessible
by entering the installer menu: Press the
10
Epic Fire Tube control module
DISPLAY WINDOW
LEFT BUTTON
RIGHT BUTTON
Saving parameters
To save parameters and exit programming:
Press the
then press
automatically after Timeout.
To enter a parameter and continue programming:
Press the
move to the next parameter and to the end of the Parameter
List. Press
the parameters will be saved automatically after Timeout.
►
button.
User's Information Manual
™
F I R E T U B E
UP BUTTON
DOWN BUTTON
►
button to go to the end of the Parameter List,
►
again. Otherwise, the parameters will be saved
▲
▼
or
button to change parameters. Press
◄
to save and return to the Base Screen. Otherwise,
►
to