Advertisement
Quick Links
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
IMPORTANT SAFEGUARDS
When using electrical equipment, basic safety precautions
should always be followed. Including the following:
• Do not use outdoors
• Do not let power supply cords touch hot surfaces
• Do not mount near gas or electrical heaters
• Equipment should be mounted in locations and at heights where it will not
be subjected to tampering by unauthorized personnel
• The use of accessory equipment not recommended by the manufacturer
may cause an unsafe condition
• Do not use this equipment for other than its intended use
SAVE THESE IMPORTANT SAFETY INSTRUCTIONS
Page 1/2 Rev. 06/08/20
DL_ELCTB_INST
© 2020 Dual-Lite, a division of Hubbell Lighting, Inc. Specifications subject to change without notice • Printed in
the USA 701 Millennium Blvd • Greenville, SC 29607 / Website www.dual-lite.com
Installation Instructions/User Manual
ELCTB
REMOTE TEST BUTTON
Advertisement
Summary of Contents for DualLite ELCTB
- Page 1 Installation Instructions/User Manual ELCTB REMOTE TEST BUTTON READ AND FOLLOW ALL SAFETY INSTRUCTIONS IMPORTANT SAFEGUARDS When using electrical equipment, basic safety precautions should always be followed. Including the following: • Do not use outdoors • Do not let power supply cords touch hot surfaces •...
- Page 2 10. To verify wire connection to the board, gently tug on the wires and/or visually inspect them. 11. Position Test Button over the junction box and align the two ELCTB screw holes with the cover plate screw holes 12. Drive the #8 screws provided directly into the junction box’s cover plate screw holes.
Need help?
Do you have a question about the ELCTB and is the answer not in the manual?
Questions and answers