Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for IFM moneo appliance QHA300
- Page 1 Instructions for set-up moneo|appliance QHA300 V1.12 or higher...
-
Page 2: Table Of Contents
QHA300 Contents Preliminary note ............. Symbols used . -
Page 3: Preliminary Note
QHA300 1 Preliminary note You will find instructions, technical data, approvals and further information using the QR code on the unit / packaging or at documentation.ifm.com. 1.1 Symbols used Requirement Instructions Reaction, result [...] Designation of keys, buttons or indications Cross-reference Important note Non-compliance may result in malfunction or interference. -
Page 4: Safety Instructions
QHA300 2 Safety instructions • The unit described is a subcomponent for integration into a system. – The system architect is responsible for the safety of the system. – The system architect undertakes to perform a risk assessment and to create documentation in accordance with legal and normative requirements to be provided to the operator and user of the system. -
Page 5: Intended Use
QHA300 3 Intended use IT hardware to operate moneo; incl. management system for appliance maintenance. -
Page 6: Function
QHA300 4 Function The appliance management system (AMS) allows the user to carry out basic maintenance tasks for the moneo|appliance, e.g.: • Setting the network configuration and hostnames • Setting of date and time • Rebooting or shutting down the moneo|appliance •... -
Page 7: Installation
To remove, pull down the retaining latch with a screwdriver. The device is rated for convection cooling. u Do not impede the air circulation. Observe the operating conditions for the device specified in the data sheet. Further information at: www.ifm.com... -
Page 8: Electrical Connection
QHA300 6 Electrical connection The device must be connected by a qualified electrician. The national and international regulations for the installation of electrical equipment must be adhered to. 6.1 Grounding of the housing The device is supplied with a COMBICON connector for an external voltage input of 10 - 36 V The device offers good EMI shielding and a stable grounding point on the housing. - Page 9 QHA300 Status LED On/off switch 3x USB 3.0 1x USB 2.0 Ethernet interface A Ethernet interface B Ethernet interface C 2x display port Voltage supply Grounding For special configurations observe the device’s operating instructions. The device has DI / DO and COM ports which are inoperative and must not be used.
-
Page 10: Set-Up
QHA300 7 Set-up When the operating voltage has been applied, the moneo|appliance functions according to the factory settings. The LEDs show the status of the devices and of the interfaces. 7.1 Requirements For the moneo|appliance set-up, the following components are required. • Monitor with display port •... -
Page 11: Adapting The Hostname
QHA300 u Confirm the successful change by clicking on [Ok]. w Prompt to change the password appears. u Change the password when signing in for the first time. Password requirements: • At least 8 characters • Must contain: – at least one upper case letter –... -
Page 12: Opening The Appliance Management System (Ams)
QHA300 u Select [I) Set the IP address]. w [Network (ip)] opens. u Enter the new IP address using the keyboard and select [Ok]. w [Network configuration] opens. Now the settings must also be made for the network mask, gateway and the DNS servers. Once all settings have been made, they must be permanently saved. -
Page 13: Opening Moneo
QHA300 u Log in as administrator with the login details assigned in the AMS console. If the user has not previously logged in to the AMS console, use the following login details: User name: administrator Password: < Serial number of the moneo|appliance > u Enter the login details and confirm with [Login].