Advertisement
Quick Links
RTS 8A 53B SMALL OUTER CURVE BILLBOARD
CONGRATULATIONS
Congratulations in choosing a unique product to enhance your slot car track
diorama. This can truly be described as a product born from a love for slot cars.
Buying this product have made you a member of a very special family, yes you are
not dealing with a faceless business, but rather a family of slot car fanatics.
We put hours of skill and more importantly love into our products and it is wonderful
to share our love for slot cars with you. May you enjoy the build and have years of
joy having it as part of your trackside diorama.
This product is an imaginary billboard. This is a fun object that will add a bit of
character to any slot car trackside diorama. It is obviously designed to be positioned
on the outside of a curve. It has a very interesting curved structure that will catch the
eye, whether viewing from the front or back. Suitable artwork is supplied and there is
actually quite a number too choose from.
WARRANTY
This product is covered by a comprehensive money-back warranty to ensure your
absolute satisfaction with your purchase.
WHO ARE WE?
This product is brought to you by racetrackscenics.com. If you have not done so
already, please visit our website today. You are also most welcome to visit the
Facebook pages
"Race Track Scenics Slot Car Scenery" and "Johan Malan" to
keep up to date with the latest developments and the launching of exciting new
products that may be in the pipeline.
You can contact Kevin Sharpe on
Email: racetrackscenics@gmail.com
Text in the USA 586 549 2879
WhatsApp 1-586-549-2879
for any assistance that you might require. Your feedback and a photo or two of your
trackside addition will really be appreciated. We love to share in your joy!
WHAT IS IN THE KIT?
In this kit you will find all the laser cut pieced needed to assemble this product. The
pieces are still intact in the sheets as they were cut to ensure that all the parts are
there. Some of the loose bits inside pieces may have been removed, but they are not
ASSEMBLY INSTRUCTIONS
1
Advertisement
Related Manuals for RACE TRACK SCENICS 8A 53B
Summary of Contents for RACE TRACK SCENICS 8A 53B
- Page 1 You are also most welcome to visit the Facebook pages “Race Track Scenics Slot Car Scenery” and “Johan Malan” to keep up to date with the latest developments and the launching of exciting new products that may be in the pipeline.
-
Page 2: What You Will Need
part of the finished product. In the section “FAMILIARIZE YOURSELF” below, you will find diagram(s) that identify and explain each piece (component) that you are about to assemble. In the section “PREPARING THE CUT PIECES” below, you will learn how to proceed to prepare the pieces for assembly. In the kit you will also find some optional pre-cut artwork printed on matt photo paper. -
Page 3: Familiarize Yourself
FAMILIARIZE YOURSELF Have a look at the photos of the finished product from the front and back. - Page 4 Now have a look at the next diagram where all the laser cut parts are showed and numbered from A to E and we will identify which is which and where they fit in. You will notice that this curved structure is made up of three vertical girders (A 1-3) which sits on two curved foundation beams (B) and (C).
- Page 5 Our laser cut parts are specifically cut to very fine tolerances to ensure a snug fit and therefore it is wise to check all fits before gluing parts together. You may need to trim a lug here and there to make assembly easier. PAINTING YOUR PRODUCT We would strongly advise you to finish the product with paint or wood stain to make them as appealing as possible.
- Page 6 fit in. Once again glue the nubs and slots and apply some pressure to get a snug fit. Allow the glue to fully sets before you proceed. The last step in the assembly is to glue the nine vertical planks (E 1-9) to the four horizontal beams.