"THE MOST TRUSTED NAME IN JOBSITE SECURITY"™
• Do not put fuels, flammables, explosives or hazardous materials inside these products.
• Gasoline, solvents, gun powder or other munitions, dynamite, propane, acetylene or other such products can explode if
stored inside these products.
• Use these products ONLY for storing and transporting electric or hand tools and equipment, and other similar materials.
• Failure to follow these warnings or modifications or other uses of these products could result in death, serious injury or
property damage.
Read and understand all instructions and warnings before operating or using this product.
Any modification or unintended use of this product shall immediately void all manufacturers warranties. Manufacturer dis-
claims all liability for injuries to persons or property resulting from any modification to, or unintended use of this product.
TOOLS REQUIRED- One wrench with 7/16" socket.
PADLOCK INFORMATION- Padlock with
included).
1. Open your padlock and slide the U-bolt over the lock shackle.
2. Slide the lock through the lock housing on the front of the box (figure 1).
3. Guide the U-bolt through the two holes in the back of the lock housing (figure 1).
4. Secure the U-bolt with the two nylon lock nuts supplied.
5. Repeat the procedure for the second lock.
6. To lock, close lid and push bottom of padlock until lock "clicks" closed.
7. To open, turn key and open lid.
INSTRUCTION AND REPAIR PARTS MANUAL
KNAACK® CLASSIC STORAGE CHESTS
DANGER
Keep hands clear when closing lid. Failure to do so could result in severe injury.
–ATTENTION–
–NOTICE–
PADLOCK INSTALLATION INSTRUCTIONS
Lock Shackle
Figure 1
7
⁄
"–1" shackle height (figure 2) (recommended Master No 5 or equivalent, not
8
MODELS 2032, 2048, 2060, 3068
WARNING
U-Bolt
Figure 1
7/8"-1"
Figure 2
(measure height
when lock is closed)
Need help?
Do you have a question about the 2032 and is the answer not in the manual?
Questions and answers