La Hacienda Malmo Contemporary Tall Steel Chimenea 56017US User Instructions

Download this manual

La Hacienda

Malmo Contemporary

Tall Steel Chimenea

User Instructions - Please keep for future reference

Tools required (not included)

Tools list

IMPORTANT – Carefully remove any packaging before use, but retain the safety instructions.

These instructions form part of the product.

Please take note of all of the safety warnings listed in these instructions.

Please read these instructions in their entirety and retain them for future reference.

These instructions should be stored with the product.

This product is for domestic use ONLY and should not be used commercially or for contract purposes.

Produced in China for La Hacienda UK Ltd

Hangar 27, Site C, Aston Down Airfield, Nr Stroud, Glos, GL6 8HR, UK

www.lahacienda.co.uk

56017US

V1.0

Page 1 La Hacienda ® Malmo Contemporary Tall Steel Chimenea 56017US V1.0 User Instructions - Please keep for future reference Tools list Tools required (not included) IMPORTANT – Carefully remove any packaging before use, but retain the safety instructions. These instructions form part of the product. Please take note of all of the safety warnings listed in these instructions.
Page 2 Care and safe use guidelines Ensure chimenea has a minimum of 7ft DANGER Plastic bags can cause overhead clearance and has a minimum of suffocation. Dispose of all packaging 7ft clearance from any combustible materials materials properly. or items. The assembled product is heavy and once DANGER Failure to read and observe all positioned must not be moved whilst in use.
Page 3 Care and safe use guidelines DO NOT use alcohol, intoxicants, narcotics To extinguish unit – stop adding fuel or any form of non-prescription drug when and allow fire to die or douse with handling the product as the ability to safely sand. assemble and operate will be impaired. For safety reasons, always inspect your DO NOT use water as this may chimenea prior to use for signs of fatigue...
Page 4 Assembly diagram Assembly Instructions IMPORTANT - Remove any packaging before use, but retain the safety instructions and store them with this product. ASSEMBLY STEP 1 - Attach the body section (2) to the base section (5) by screwing 4 x M6 x 12mm bolts (A) with 4 x washers (B) into the pre-threaded holes in the base section.