Installation - Nave BETA Manual

EN
Intended use
Other uses or modifications of the product are considered improper and can lead to risks such as injury and damage.
The manufacturer accepts no liability for damage resulting from improper use.
▪
The product is approved for use in all EU countries.
▪
The product is intended for use indoors.
▪
The product is intended for use in private households only and not for commercial use.
▪
Do not connect the product to the mains when it is in its packaging.
▪
Before using the product, make sure that it is suitable for your intended use.
Safety
▪
Fully complete the installation of the product, before connecting to the mains.
Warranty/Guarantee
Information on the warranty can be found in our General Terms and Conditions on the Internet at www.naeve.de.
Scope of delivery
▪
Operating instructions
▪
Lights

Installation

Electric shock
▪
Disconnect the mains voltage or mains plug before starting work.
▪
Do not unplug the mains plug by pulling the cable, always take hold of the mains plug directly.
▪
Make sure that no hazards can be caused by electrically conductive objects or media.
▪
Make sure that the type of electrical installation does not reduce the protection against electric shock
(protection class, protective insulation).
▪
Make sure that the cable is not bent excessively or crushed.
Non-compliance with these instructions will result in serious or fatal injury.
Cleaning and care
Electric shock
▪
Disconnect the mains voltage or mains plug before starting work.
▪
Do not unplug the mains plug by pulling the cable, always take hold of the mains plug directly.
▪
Make sure that no moisture from gets into connection compartments or on live parts.
Non-compliance with these instructions will result in serious or fatal injury.
31905xx_Manual_16917_03_V1.docx
DANGER
DANGER
5 / 28