Advertisement
How to setup the LampUSBCMAW
Before installing the LampUSBCMAW make sure
to remove the plastic film from the lamp shade.
1. Unscrew the lamp shade fastener, attach the
lamp shade and screw the fastener back into place.
2. Plug the power cable into the power port of
LampUSBCMAW and the AC adapter into a wall
outlet.
Controlling the LED lighting
To turn the lamp on, simply tap on the touch sensor
once to turn it on at the dimmest level. Then tap on
it again to cycle through the next 2 brightness levels
and off.
• 1st tap: On/Dimmest
• 2nd tap: Medium brightness
• 3rd tap: Highest brightness
• 4th tap: Off
USB charging
Connect your smartphone, tablet and any other
USB powered device into either of the 2 USB ports
(5V/2.4A) with a USB-Lightning or USB-Micro USB
cable (not included).
Advertisement
