Summary of Contents for WATSON INDUSTRIES ADS-C232-1A
- Page 1 ADS-C232-1A Dual Axis Vertical Reference System Owner’s Manual Watson Industries, Inc. 3035 Melby Street Eau Claire, WI 54703 P: 715 839 0628 F: 715 839 8248 E: support@watson-gyro.com...
-
Page 2: Table Of Contents
Customer Service ......................8 Watson Industries prides itself on solving customer problems and serving their needs in a timely fashion. This manual is intended to facilitate this goal and to provide written information about your product. We ask that you carefully read this manual. -
Page 3: Introduction
It is a highly accurate and rugged device with many advantages over other types of angular rate and incline-sensing devices. This manual describes operation of the Watson Industries Vertical Reference and also provides useful application information to the system designer. -
Page 4: Power
Returning the unit to a displacement and angular rate within range would allow the unit to again synchronize. Depending on the extent of output saturation, the synchronization will occur in less than sixty (60) seconds. Watson Industries, Inc. ADS-C232-1A Rev G 04/24/2023... -
Page 5: Specifications
-15 VDC X Angle Displacement Analog Output Y Angle Displacement Analog Output X Angular Rate Analog Output Y Angular Rate Analog Output The analog output connections are referenced to Ground on pin 1. Watson Industries, Inc. ADS-C232-1A Rev G 04/24/2023... -
Page 6: Dimensions
Dimensions Figure 2: Dual Axis ADS-C232-1A Watson Industries, Inc. ADS-C232-1A Rev G 04/24/2023... -
Page 7: Warning
DISCLAIMER The information contained in this manual is believed to be accurate and reliable; however, it is the user’s responsibility to test and to determine whether a Watson Industries’ product is suitable for a particular use. Suggestion of uses should not be taken as inducements to infringe upon any patents. -
Page 8: Customer Service
Customer Service All repairs, calibrations and upgrades are performed at the factory. Before returning any product, please contact Watson Industries to obtain a Returned Material Authorization number (RMA). Return Address & Contact Information Watson Industries, Inc. 3035 Melby Street Eau Claire, WI 54703...