Vital Baby NURTURE Quick Start Manual

USING YOUR STERILISER
IN COLD WATER
STERILISATION MODE
WARNING!
INSTRUCTIONS FOR USE AND CARE.
IMPORTANT, READ CAREFULLY AND
RETAIN FOR FUTURE USE.
• Keep the steriliser out of reach of children.
• Always follow loading instructions and do not
overload.
• Always use the steriliser on a hard, level and
stable surface.
• Before placing items into the steriliser ensure
they are suitable for cold water sterilisation
• The lid is not leak proof and the contents will
spill out if the unit is allowed to tip.
• In the event of any spillage, wipe up the
solution immediately.
• Do not attempt to transport the unit with any
sterilising solution inside.
• Do not use abrasive agents or scourers to clean
the steriliser.
• Cold Water Sterilisation on its own is not
a substitute for thorough cleaning. Always
clean feeding bottles, teats and accessories
thoroughly before sterilising them.
• Before sterilising, thoroughly wash all items in
warm soapy water and rinse.
www.vitalbaby.com
Made in China to Vital Baby ® specifications. Vital Innovations Limited, Hatfield, Herts, AL10 9EW,
United Kingdom.
Vital Baby is a registered trademark. NURTURE™ is a trademark. Patent protected. Design Rights.
®
© Vital Innovations Ltd 2019.
LOADING AND OPERATION OF YOUR
COLD WATER STERILISER
• You can cold water sterilise up to 6 standard or
4 breast like bottles at a time.
• Remove both lower and upper baskets from
the steriliser. Separate the lower basket
from the central support post by twisting it
anticlockwise.
• Place the steriliser on a hard, level and stable
surface in a secure location where it cannot be
reached by children.
• Following the instructions from the sterilant
manufacturer, make up your sterilising solution
accordingly in the steriliser base.
• Place your fully disassembled bottles, teats
and/or accessories into the solution ensuring
that there are no trapped air bubbles.
• Flip the lower basket upside down and place
it on top of the contents in the steriliser
base. This acts as a weight and ensures full
submersion.
• Leave the equipment submerged in line with
the sterilant manufacturers instructions.
AFTER COLD WATER
STERILISATION
• Wash your hands thoroughly before touching
sterilised items.
• Once you are ready to remove your items,
carefully remove the steriliser lid.
• Remove the items you need and carefully shake
off any excess solution.
• Assemble bottles/accessories accordingly
• Once bottles and accessories are removed
from the steriliser they must be assembled and
used immediately or re-sterilised.
• A fresh sterilising solution should be made up
every 24 hours.
2 in 1 combination steriliser
INSTRUCTIONS
CONTENTS:
A) STERILISER LID
A
B) STERILISER BASE
C) BOTTOM BASKET
D) UPPER BASKET
E) CENTRAL SUPPORT POST
F) TONGS
D
C
F
B
Also included:
x1
150ml
/5oz
breast like
feeding bottle
E
x1
240ml
/8oz
breast like
feeding bottle