Ec-Declaration Of Conformity - Ecom Instruments H-251 A Instruction Manual

In those countries where the restriction of a legal guarantee (e.g.
the exclusion or limitation of subsequent damage) is not permitted,
it could be that the above mentioned limitations and exclusions are
not valid for each purchase. Should any clause of this guarantee
be found ineffective or unacceptable before a court, then the effec-
tivity or enforcement of any other part of this guarantee should be
unaffected by such claims.

11. EC-Declaration of conformity

This product fulfils all relevant guideline regulations 94/9/EG for
equipment and protective systems in potentially explosive areas.
The granted EC certificate of conformity confirms that the product
complies with all relevant norms and fundamental health and safe-
ty regulations.
Decisive harmonised norms:
EN 50014:1997
EN 50019:2000
EN 50020:1994
EN 50281-1-1:1998
This product has the CE indicator to confirm that all relevant
guidelines are fulfilled.
ECOM Rolf Nied GmbH
Assamstadt, November 2001
Electrical means of production for hazardous areas
general regulations.
Electrical means of production for hazardous areas
increased safety "e".
Electrical means of production for hazardous areas
intrinsic regulations, "i".
Electrical means of production for hazardous areas
flammable dusts.
19