Sunex Tools SX231B Operating Instructions Manual

Operating Instructions • Warning Information • Parts Break down
SPECIFICATIONS
Max. Free Speed ...................................... 25,000 RPM
Collect Size .............................................................1/4"
Air Consumption ................................................ 4 CFM
Air Inlet ............................................................. 1/4 NPT
Air Pressure ...................................................... 90 psig
Recommended Hose Size ..............................3/8" I.D.
Length ...................................................................5.13"
Weight .............................................................. 0.8 Lbs.
Sound Level ................................................... 94.5 dBA
Some dust created by power sanding, sawing, grinding,
drilling, and other construction activities contains chemicals
known to cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how
often you do this type of work. To reduce your exposure to
these chemicals: work in a well ventilated area, and work
with approved safety equipment, such as those dust masks
that are specially designed to filter out microscopic
particles.
SX231B: Parts Breakdown & Operating Manual
WARNING
AIR DIE GRINDER
RATED RPM OF ACCESSORY
RPM RPM RPM
USED MUST EXCEED THE
MAXIMUM TOOL RPM SHOWN
READ THIS MANUAL BEFORE
OPERATING TOOL
ALWAYS WEAR EYE PROTECTION
WHEN OPERATING OR
PERFORMING MAINTENANCE
ON THIS TOOL
ALWAYS WEAR HEARING
PROTECTION WHEN OPERATING
THIS TOOL
AVOID PROLONGED EXPOSURE
TO VIBRATION
1
SX231B
1/4" DRIVE MINI
WARNING
© Copyright 2018, Sunex Tools
Rev. 8/16/18
®