Kenmore ELITE CROSSOVER ULTRA 125.10335610 Use & Care Manual page 20

NOZZLE
To maintain efficient cleaning, the agitator
must be kept free of carpet fiber, string, or
hair build-up. After every 7 to 10 uses,
unplug and turn vacuum cleaner over and
check agitator for fiber and hair build-up.
Use scissors to remove any build-up
entangled around the agitator.
The dirt sensor lenses are located on the
inside of the nozzle. These lenses should
be cleaned periodically.
CAUTION
Never use water or any cleaning
solution when cleaning the lenses. The
residue of the water or cleaners will
accelerate the recoating of the lenses
and make cleaning necessary sooner.
AGITATOR CLEANING
CLEANING DIRT SENSOR LENSES
PET HANDIMATE
Cut off any carpet
pile and lint
entangled around
agitator with a pair
of scissors.
CAUTION
To reduce the risk of injury from
moving parts, remove Pet HandiMate
from vacuum hose or wand before
servicing.
1. Remove nozzle from the body. See
"CROSSOVER MODE" in OPERATION
MODES (page 9).
2. Turn nozzle upside down. See BELT
CHANGING (page 19).
3. Remove agitator. See BELT
CHANGING (page 19).
4. The two dirt sensor lenses are located
on the inside of the opening as shown.
Brush each sensor lens several times to
remove dust and dirt.
- 20 -
®
®