Pioneer SE-MJ553BT - Wireless Bluetooth Stereo Headphones Quick Start Guide

Pioneer SE-MJ553BT - Wireless Bluetooth Stereo Headphones Quick Start Guide

Also See for SE-MJ553BT:

Advertisement

Pioneer SE-MJ553BT - Wireless Bluetooth Stereo Headphones Quick Start Guide

Set Contents

Confirm the presence of all parts and components before use.

  1. Headphones
  2. Micro-USB cable
  3. Warranty (Europe / U.S.A. and Canada / Japan)
  4. Quick Start Guide (this document)
  5. Safety Guide

Names of Parts

Names of Parts

  1. ( + ) button
  2. ( – ) button
  3. ( ) button
  4. Micro-USB port
  5. LED indicator
  6. Microphone

Charging the batteries

The unit's battery must be recharged before use.
The accessory micro-USB cable must be used for recharging the unit's battery.

Connect the appropriate connector on the accessory micro-USB cable to the microUSB port on the headphones, and the USB plug on the other end to a USB port on a computer (see Fig. 3).
Charging the batteries

  • When recharging begins, the LED indicator on the headphones will light red.
  • Full recharging requires about 4 hours; when recharging is completed, the LED indicator will turn off.


Note

  • Battery recharging time and usable battery time may vary depending on ambient temperature and frequency of use.

Notes on battery charging

  • Battery performance is influenced by the surrounding temperature. Charge the supplied rechargeable batteries within a temperature range of 10 to 35 degrees celcius.
  • Batteries become slightly warm when charging. This is not a malfunction.
  • Recharging may not be possible if computer is in power-saving mode.
  • This device cannot be used during charging.

Pairing

Pairing must be performed before the headphones can be used to listen to music or communicate using a Bluetooth device.
For further details regarding the pairing procedure, consult the user's manual for your Bluetooth device.

  1. While the power of the unit is off, hold down the ( ) button until the unit enters pairing mode.
    • The pairing mode is confirmed by the LED indicator's alternately flashing blue and red.
      Release the ( ) button after confirming that the LED indicator is alternately lighting blue and red.
  2. Turn on the power to the Bluetooth device you wish to pair with, and begin pairing; search for this unit (wireless headphones) from the paired Bluetooth device.
    • Set theBluetooth device close (within one meter) to the wireless headphones.
    • These wireless headphones will appear in theBluetooth device's display as "SE-MJ553BT".
  3. Confirm that pairing has been successfully completed with the Bluetooth device.
    • Look at the display for the Bluetooth-enabled device and select "SE-MJ553BT".
    • When the LED lamp is flashing in blue slowly about once every 3 seconds, pairing is complete. When it is flashing quickly about once every second, pairing is not complete.
    • The PIN code for these wireless headphones has been factory set at "0000". Input this code if requested by the Bluetooth device.

Connect to the Bluetooth device

  • Confirm that the power to the wireless headphones is ON before connecting to the Bluetooth device.
  • Depending on the device, connection between the wireless headphones and Bluetooth device may be effected automatically after pairing.

Disconnecting from the Bluetooth device

  • Hold down the () button until the flashing LED lamp turns off and the power of the device turns off.

Specifications

Transmission format Bluetooth Standard Protocol Ver. 3.0
Output Bluetooth Standard Protocol Power Class 2
Maximum transmission distance About 10 m line of sight *1
Frequency used 2.4 GHz (2.4000 GHz to 2.4835 GHz)*2
Modulation FHSS
Supported Bluetooth profiles A2DP, AVRCP, HFP, HSP
Supported CODEC SBC, AAC
Contents protection SCMS-T
Battery life with continuous use Maximum 15 hours of continuous transmission (including music-play time)
Recharging time About 4 hours
Power DC 3.7 V internally rechargeable lithium-ion battery
Weight 170 g
HEADPHONES
Type Fully-enclosed dynamic headphones
Driver units ø40 mm
Frequency response 10 Hz to 22 000 Hz
Ear pad Polyurethane (leather finish)
MICROPHONE
Type Electret condenser type
Directionality Omni-directional microphone
Frequency response 20 Hz to 16 000 Hz
ACCESSORIES
Micro-USB cable 1
Warranty (Europe / U.S.A. and Canada / Japan) 1
Quick Start Guide (this document) 1
Safety Guide 1

*1 Transmission distance is an approximation. Actual usable distance may vary depending on surrounding conditions.
*2 This product utilizes radio waves in the 2.4 GHz spectrum. Some signal dropouts may be experienced due to interference with radios, microwave ovens, and other devices using the 2.4 GHz spectrum.


Note
Specifications and design are subject to possible modifications without notice due to improvements.

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Pioneer SE-MJ553BT - Wireless Bluetooth Stereo Headphones Quick Start Guide

Advertisement

Need Assistance?

Do you have a question about the SE-MJ553BT that isn't answered in the manual? Leave your question here.

Error while submitting your question. Please, reload page and try again.

Thank you! Your question has been received!

Table of Contents