NetCam
Wi-Fi® Camera with Night Vision
USER MANUAL
8820-01175
Rev.
B00
F7D7601v1
Ok mk 8/22/12
TABLE OF CONTENTS
Getting Started
What's in the Box
Initial Setup
Set Up Your Camera Wirelessly Through Your Mobile Devices
Getting to Know Your Wi-Fi Camera
Front Panel
Back Panel
Technical Details
Software Features and Specifications
Hardware Features and Specifications
System Requirements
Resetting the Camera
Troubleshooting, Support, and Warranty
Troubleshooting
Technical Support
Belkin International, Inc., Limited 2-Year Product Warranty
Regulatory Information
FCC Statement
Getting Started
Congratulations on buying a Belkin NetCam. This device will enable you to easily check in on your home and your loved ones when you are away.
What's in the Box
NetCam
Power Supply
Quick Installation Guide
Mounting Kit
Initial Setup
To get started, you will need:
•
Your wireless router, its network name (SSID), and password.
•
An Android device (Version 2.2 or later) or an iPhone, iPad, or iPod touch (iOS Version 4.1 or later)
Set Up Your Camera Wirelessly Through Your Mobile Devices
1. Plug the NetCam into a power outlet
Add chart
2. Switch the NetCam to Setup Mode by flipping up the switch on the back of the camera
3. Download the NetCam App from the App Store or Google Play
Add app logo
4. Set Up on iPhone, iPad, or iPod touch
4.1 Connect your mobile device to NetCam Wi-Fi signal
Go to "Settings > Wi-Fi" on your iPhone/iPad/iPod touch and connect to the camera's Wi-Fi signal.
<use image from QIG, Backside third image from left>
4.2 Launch the NetCam App
Once your device establishes a connection with the camera, launch the NetCam App. You should see a pop-up message like the one below. Click "Yes" to set
up your camera.