3-6-1 Installing Thermal Pad onto CPU
•
Strongly recommended to use gloves and mask when handling the thermal pad.
•
The thermal pad contains Indium foil, so it is strongly recommended to use gloves when
replacing the thermal pad.
Follow these instructions to install the thermal pad:
1.
Place the thermal pad on the top of CPU.
2.
Install the CPU heatsink.
When installing the heatsink to CPU, use a Torx T20 screwdriver to tighten 4 captive nuts in
sequence as 1-4. The screw tightening torque: 10 ± 0.5 kgf-cm.
System Hardware Installation
- 35 -
4 4
2 2
3 3
1 1