REMOTE CONTROL
The remote requires a line-of-sight path to allow for the signal to be received by the unit.
Position the unit so the receiver lens is visible from the remote control.
The symbols on the remote correspond to the symbols on the main unit.
The remote control supplied with this fan uses 2 x AAA batteries. (Not supplied)
Operating your Fan
•
MODE – Press this key to change between
different wind settings; Natural Wind, Sleep,
Normal
•
ON/SPEED – Press this key to switch the unit
on, and to set the fan speed as needed. The
related indicator light on the control panel
will light up. The following diagram shows the
order of the fan speeds
•
OFF – Press this key to switch the unit off
•
TIMER – Press this key to set the time as
needed. The following diagram shows the
order of the time settings