MARCOM M-DL4100BT User Manual page 4

Table of Contents

Advertisement

Installation
Detachable control panel (D.C.P.)
Removing the detachable control panel
1. Turn the power off
2. Press the D.C.P release button
3. Remove the D.C.P
Attaching the detachable control panel
1. Insert the panel from the right side.
2. Then press the left side of D.C.R to hook up properly to the radio unit
CAUTION
• DO NOT insert the D.C.P from the left side. Doing so may damage it.
• The D.C.P can easily be damaged by shocks. After removing it, place it in a protective case and
be careful not to drop it or subject it to strong shocks.
• When the release button is pressed and the D.C.P is unlocked, the car's vibrations may cause it
to fall.
• The rear connector that connects the main unit and the D.C.P is an extremely important part.
Be careful not to damage it by pressing on it with fingernails, pens, screwdrivers, etc.
Note:
If the D.C.P is dirty, wipe off the dirt with soft, dry cloth only. And use a cotton swab soaked in
isopropyl alcohol to clean the socket on the back of the D.C.P.
Connector
- 3 -
Panel release button
1
2

Advertisement

Table of Contents
loading

Related Products for MARCOM M-DL4100BT

Table of Contents