Asko W4096R.UK/1 User Manual page 38

Please do not fi ll detergent (liquid detergent) while program is running!
Start adding the liquid detergent to the selected compartment. The level for the selected compartment,
indicated on the display unit, will increase. When the compartment is full, stop adding the detergent.
(maximum amount of detergent that can be added to selected compartment is 1.5 l).
Before closing the dosing tank, wait for 1 minute to let the detergent fl ow into the compartment.
If you add too much liquid detergent, it may overfl ow into the washing machine drum. To remove the detergent
from the drum, use the Rinse program.
Choosing the ADS settings by opening the detergent compartment
Pull out the detergent compartment as far as it will go, to its end position! The ADS setting in the Main Menu
will be displayed.
All steps are the same as with section 2 (Choosing the ADS settings in the Main menu).
If you selected OFF in the System Settings (i.e. do not display the ADS menu in the Main Menu), then the
ADS menu will not be displayed when you open the detergent compartment.
Only add liquid detergents into the ADS tanks.
Do not mix liquid detergent with conditioner. Do not add conditioner into any ADS tank; conditioner has to
be added manually to the compartment labelled with
Do not mix diff erent liquid detergents. Before changing the liquid detergent (depending on the type of
laundry), the tanks have to be cleaned. See sections c, Cleaning the tanks.
Switching off the automatic dosing function in the ADS menu
38
A B
.
Tanks A and B should not be checked
(no check mark in the square
the system will not automatically dose
the detergent.
Liquid detergent has to be added
manually into the detergent
compartment.
). Thus,