Advertisement
Quick Links
BURG-WÄCHTER KG
Altenhofer Weg 15
58300 Wetter
Germany
Setup
secuENTRY
ENTRY 7710 RFID
Setup with app
BURGsmart
www.burg.biz
Further languages at:
www.burg.biz
Dear Customer,
Thank you very much for deciding on the ENTRY 7710 RFID,
passive transponder.
The ENTRY 7710 RFID is setup and operated using the free
smartphone app BURGsmart
*
Attention: Please check whether the RFID transponder is compatible with the
respective secuENTRY locking cylinder. The add-on article ENTRY 7174 RFID
Extender may also be required for the use of RFID transponders. For a complete
list of all compatible products, please refer to page 7 of these instructions.
Instructions
Simple instructions on the
setup and operation of your
secuENTRY components.
Follow the QR code or go to...
https://t1p.de/burgsmart-app
!
Contents index
English
Foreword
*
.
RFID:
RFID (Radio Frequency Identification) operates on the
basis of an electromagnetic field with a small radius. Once
the transponder is in the direct vicinity of the secuENTRY
cylinder or another compatible secuENTRY product, it is
supplied by the product with energy without contact.
The transponder itself therefore does not need its own
energy source, rechargeable battery or batteries.
Important:
Please read the entire operating instructions
before you start the installation.
We hope you enjoy your new locking system!
2
Advertisement
Related Manuals for Burg Wächter secuENTRY ENTRY 7710 RFID
Summary of Contents for Burg Wächter secuENTRY ENTRY 7710 RFID
- Page 1 Contents index English Further languages at: www.burg.biz Setup secuENTRY ENTRY 7710 RFID Foreword Dear Customer, Thank you very much for deciding on the ENTRY 7710 RFID, passive transponder. The ENTRY 7710 RFID is setup and operated using the free Setup with app smartphone app BURGsmart BURGsmart Attention: Please check whether the RFID transponder is compatible with the...
-
Page 2: Table Of Contents
Set contents Setup The ENTRY 7710 RFID is integrated as an opening media in a variety of ways, depending on the ENTRY 7710 RFID secuENTRY product. Please select the type of setup to suit your secuENTRY product: passive transponder Setup with the BURGsmart app: Page 2 QR-Code sticker This setup mode requires:... -
Page 3: Fig
The capture window of the camera I - User opens and you may be asked to confirm the app's access to the camera. Scan the Tap "My System" in the bottom left-hand QR code supplied with the RFID tran- corner of the BURGsmart app main sponder (Fig. - Page 4 Here you will be asked to verify yourself III - Locking plan with your administrator code. Enter the code and confirm with “OK” (Fig. 5). Use this menu to define the locking plan, namely which user is allowed to Note: The factory administrator code open which lock.
-
Page 5: Setup Via Display Keypad
Assigning a transponder using the display keypad Setup via display keypad: This function enables assigning a transponder to an existing user at a later date. This setup mode requires: • ENTRY 5711 Keypad PIN, ENTRY 5712 Keypad FP or ENTRY 7722 Keypad FP Note: Switch on the keypad using the key. -
Page 6: This Setup Mode Requires
Setup via secuENTRY Windows software Compatibility with other secuENTRY products This setup mode requires: Whether for one front door, several doors or a complete locking system: Simply configure your • ENTRY 7083 Software pro, and/or ENTRY 7783 Software pro individual unit with the secuENTRY modular system. •... - Page 7 secuENTRY Add-on Warranty Article number: ENTRY 7174 RFID-Extender 4003482501740 In order to deliver a flawless and high quality product to you and to better assist you in case of Further information RFID transponder reader. Can be used can be found on service or repair, it is necessary that faulty or defective devices along with the valid QR code be for cylinders or, in conjunction with our website:...
- Page 8 secuENTRY ENTRY 7710 RFID BURG-WÄCHTER KG Altenhofer Weg 15 58300 Wetter Germany www.burg.biz www.burg.biz...