Spark Arrestor - Craftsman 358.352680 - 18 IN. BAR Operator's Manual

prone to circulation disorders or
abnormal swelling. Prolonged use in
cold weather has been linked to blood
vessel damage in otherwise healthy
people. If symptoms occur such as
numbness, pain, loss of strength,
change in skin color or texture, or loss
of feeling in the fingers, hands, or joints
discont nue the use of this tool and
seek medical attention. An
anti-vibration system does not
guarantee the avoidance of these
problems. Users who operate power
tools on a continual and regular basis
must closely monitor their physical
condition and the condition of this tool.
CHAIN BRAKE If this saw is to be used
for commercial logging, you must order
and install a chain brake to comply with
Federal OSHA Regulations for Com-
mercial Logging. Contact your Sears
Service Center or call 1-800-235-5878:
SPARK ARRESTOR: Your saw is
equipped with a temperature timing
mufflerand spark arresting screen
whichmeets the requirements of
CaliforniaCodes4442 and 4443. All
U.S. forestlandand the statesof
California,Idaho,Maine, Minnesota,
New Jersey,Oregon,and Washington
requireby lawthat many internal
combustion enginesbe equippedwith a
spark arrestor screen.If you operatea
chainsaw in a state or localewhere
such regulations exist, you are legally
responsible for maintaining the
operatingcondition of theseparts.
Failureto do so is a violationof the law.
Refer to Customer Responsibilities
chart in the MAINTENANCE s ection.
STANDARDS: This chainsaw is listed
by UnderwritersLaboratories, i nc. in
accordance with AmericanNational
Standards for Gasoline-Powered Chain
Saws Safety Requ;rements (ANSI
B175.1-1991).
I
CARTON CONTENTS
Check carton contents against the fol-
lowing list.
Model 358.352680
• Chain Saw (fully assembled)
• Bar tool
• Chain
, Carrying Case
• Gloves
• Gas Can
• Bar & Chain Lube
• 2-cycle engine oil
o Examine parts for damage. Do not
use damaged parts.
• If you need assistance or find that
parts are missing or damaged, please
call 1-800-235-5878.
NOTE: It is normal to hear the fuel filter
rattle in an empty fuel tank.
Your unit has been factory tested and
the carburetor precisely adjusted. As a
result you may smell gasoline or find a
drop of oil/fuel residue on the muffler
when you unpack the unit.
ASSEMBLY
Your saw is fully assembled; no
assembly is necessary.